#120 Sprocket Dimensions (9–60 Teeth)

Sprockets · ANSI (ASME B29.1) roller chain

Sprockets for #120 chain (ANSI, ASME B29.1 roller chain) are built on a 38.10 mm (1 1/2 in) chain pitch and a 22.23 mm (7/8 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.

pChain pitch
38.10 mm1 1/2 in1 1/2 in38.10 mm
DrRoller diameter
22.23 mm7/8 in7/8 in22.23 mm
WWidth between inner plates
25.40 mm1 in1 in25.40 mm

Drawing

p 38.10 mmp 1 1/2 inOD ⌀238.94 mmOD ⌀9.407 inBD ⌀197.18 mmBD ⌀7.763 inPD ⌀219.41 mmPD ⌀8.638 in
18-tooth sprocket with three rollers seated. Diameters to scale; tooth flank simplified.Drawn to scale · Dimensions in mmDimensions in inches

#120 specifications

pChain pitch38.10 mm1 1/2 in
DrRoller diameter22.23 mm7/8 in
WWidth between inner plates25.40 mm1 in
tTooth width, single strand23.47 mm0.924 in
ISO 606 A-series equivalent24A

Also known as

24ARS120

Other chains with the same pitch

Chain dimensions

All sprocket chain sizes

Compare all 19 chain sizes in the Sprockets chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
  4. Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
  5. Ametric: American Standard (ANSI) roller chain dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.