#140 Sprocket Dimensions (9–60 Teeth)
Sprockets · ANSI (ASME B29.1) roller chain
Sprockets for #140 chain (ANSI, ASME B29.1 roller chain) are built on a 44.45 mm (1 3/4 in) chain pitch and a 25.40 mm (1 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.
- pChain pitch
- 44.45 mm1 3/4 in1 3/4 in44.45 mm
- DrRoller diameter
- 25.40 mm1 in1 in25.40 mm
- WWidth between inner plates
- 25.40 mm1 in1 in25.40 mm
Drawing
#140 specifications
| pChain pitch | 44.45 mm1 3/4 in |
|---|---|
| DrRoller diameter | 25.40 mm1 in |
| WWidth between inner plates | 25.40 mm1 in |
| tTooth width, single strand | 23.47 mm0.924 in |
| ISO 606 A-series equivalent | 28A |
Also known as
28ARS140
Chain dimensions
All sprocket chain sizes
Sources
- ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
- ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
- Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
- Ametric: American Standard (ANSI) roller chain dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.