#160 Sprocket Dimensions (9–60 Teeth)

Sprockets · ANSI (ASME B29.1) roller chain

Sprockets for #160 chain (ANSI, ASME B29.1 roller chain) are built on a 50.80 mm (2 in) chain pitch and a 28.58 mm (1 1/8 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.

pChain pitch
50.80 mm2 in2 in50.80 mm
DrRoller diameter
28.58 mm1 1/8 in1 1/8 in28.58 mm
WWidth between inner plates
31.75 mm1 1/4 in1 1/4 in31.75 mm

Drawing

p 50.80 mmp 2 inOD ⌀318.58 mmOD ⌀12.543 inBD ⌀263.97 mmBD ⌀10.393 inPD ⌀292.55 mmPD ⌀11.518 in
18-tooth sprocket with three rollers seated. Diameters to scale; tooth flank simplified.Drawn to scale · Dimensions in mmDimensions in inches

#160 specifications

pChain pitch50.80 mm2 in
DrRoller diameter28.58 mm1 1/8 in
WWidth between inner plates31.75 mm1 1/4 in
tTooth width, single strand29.38 mm1.157 in
ISO 606 A-series equivalent32A

Also known as

32ARS160

Chain dimensions

All sprocket chain sizes

Compare all 19 chain sizes in the Sprockets chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
  4. Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
  5. Ametric: American Standard (ANSI) roller chain dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.