#25 Sprocket Dimensions (9–60 Teeth)

Sprockets · ANSI (ASME B29.1) roller chain

Sprockets for #25 chain (ANSI, ASME B29.1 roller chain) are built on a 6.35 mm (1/4 in) chain pitch and a 3.30 mm (0.130 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.

pChain pitch
6.35 mm1/4 in1/4 in6.35 mm
DrRoller diameter
3.30 mm0.130 in0.130 in3.30 mm
WWidth between inner plates
3.18 mm1/8 in1/8 in3.18 mm

Drawing

p 6.35 mmp 1/4 inOD ⌀39.82 mmOD ⌀1.568 inBD ⌀33.27 mmBD ⌀1.310 inPD ⌀36.57 mmPD ⌀1.440 in
18-tooth sprocket with three rollers seated. Diameters to scale; tooth flank simplified.Drawn to scale · Dimensions in mmDimensions in inches

#25 specifications

pChain pitch6.35 mm1/4 in
DrRoller diameter3.30 mm0.130 in
WWidth between inner plates3.18 mm1/8 in
tTooth width, single strand2.80 mm0.110 in
ISO 606 A-series equivalent04C

#25 and #35 are rollerless bushing chains; the figure given as roller diameter is the bushing diameter. #25 is common on scooters, small engines and robotics.

Also known as

04CRS25

Chain dimensions

All sprocket chain sizes

Compare all 19 chain sizes in the Sprockets chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
  4. Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
  5. Ametric: American Standard (ANSI) roller chain dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.