#35 Sprocket Dimensions (9–60 Teeth)
Sprockets · ANSI (ASME B29.1) roller chain
Sprockets for #35 chain (ANSI, ASME B29.1 roller chain) are built on a 9.53 mm (3/8 in) chain pitch and a 5.08 mm (0.200 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.
- pChain pitch
- 9.53 mm3/8 in3/8 in9.53 mm
- DrRoller diameter
- 5.08 mm0.200 in0.200 in5.08 mm
- WWidth between inner plates
- 4.76 mm3/16 in3/16 in4.76 mm
Drawing
#35 specifications
| pChain pitch | 9.53 mm3/8 in |
|---|---|
| DrRoller diameter | 5.08 mm0.200 in |
| WWidth between inner plates | 4.76 mm3/16 in |
| tTooth width, single strand | 4.28 mm0.168 in |
| ISO 606 A-series equivalent | 06C |
#25 and #35 are rollerless bushing chains; the figure given as roller diameter is the bushing diameter (0.200" for #35).
Also known as
06CRS35
Other chains with the same pitch
Chain dimensions
All sprocket chain sizes
Sources
- ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
- ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
- Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
- Ametric: American Standard (ANSI) roller chain dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.