#50 Sprocket Dimensions (9–60 Teeth)

Sprockets · ANSI (ASME B29.1) roller chain

Sprockets for #50 chain (ANSI, ASME B29.1 roller chain) are built on a 15.88 mm (5/8 in) chain pitch and a 10.16 mm (0.400 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.

pChain pitch
15.88 mm5/8 in5/8 in15.88 mm
DrRoller diameter
10.16 mm0.400 in0.400 in10.16 mm
WWidth between inner plates
9.53 mm3/8 in3/8 in9.53 mm

Drawing

p 15.88 mmp 5/8 inOD ⌀99.56 mmOD ⌀3.920 inBD ⌀81.26 mmBD ⌀3.199 inPD ⌀91.42 mmPD ⌀3.599 in
18-tooth sprocket with three rollers seated. Diameters to scale; tooth flank simplified.Drawn to scale · Dimensions in mmDimensions in inches

#50 specifications

pChain pitch15.88 mm5/8 in
DrRoller diameter10.16 mm0.400 in
WWidth between inner plates9.53 mm3/8 in
tTooth width, single strand8.71 mm0.343 in
ISO 606 A-series equivalent10A

Also known as

10ARS50

Other chains with the same pitch

Chain dimensions

All sprocket chain sizes

Compare all 19 chain sizes in the Sprockets chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
  4. Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
  5. Ametric: American Standard (ANSI) roller chain dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.