#60 Sprocket Dimensions (9–60 Teeth)
Sprockets · ANSI (ASME B29.1) roller chain
Sprockets for #60 chain (ANSI, ASME B29.1 roller chain) are built on a 19.05 mm (3/4 in) chain pitch and a 11.91 mm (15/32 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.
- pChain pitch
- 19.05 mm3/4 in3/4 in19.05 mm
- DrRoller diameter
- 11.91 mm15/32 in15/32 in11.91 mm
- WWidth between inner plates
- 12.70 mm1/2 in1/2 in12.70 mm
Drawing
#60 specifications
| pChain pitch | 19.05 mm3/4 in |
|---|---|
| DrRoller diameter | 11.91 mm15/32 in |
| WWidth between inner plates | 12.70 mm1/2 in |
| tTooth width, single strand | 11.66 mm0.459 in |
| ISO 606 A-series equivalent | 12A |
Also known as
12ARS60
Other chains with the same pitch
Chain dimensions
All sprocket chain sizes
Sources
- ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
- ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
- Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
- Ametric: American Standard (ANSI) roller chain dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.