#80 Sprocket Dimensions (9–60 Teeth)

Sprockets · ANSI (ASME B29.1) roller chain

Sprockets for #80 chain (ANSI, ASME B29.1 roller chain) are built on a 25.40 mm (1 in) chain pitch and a 15.88 mm (5/8 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.

pChain pitch
25.40 mm1 in1 in25.40 mm
DrRoller diameter
15.88 mm5/8 in5/8 in15.88 mm
WWidth between inner plates
15.88 mm5/8 in5/8 in15.88 mm

Drawing

p 25.40 mmp 1 inOD ⌀159.29 mmOD ⌀6.271 inBD ⌀130.40 mmBD ⌀5.134 inPD ⌀146.27 mmPD ⌀5.759 in
18-tooth sprocket with three rollers seated. Diameters to scale; tooth flank simplified.Drawn to scale · Dimensions in mmDimensions in inches

#80 specifications

pChain pitch25.40 mm1 in
DrRoller diameter15.88 mm5/8 in
WWidth between inner plates15.88 mm5/8 in
tTooth width, single strand14.61 mm0.575 in
ISO 606 A-series equivalent16A

Also known as

16ARS80

Other chains with the same pitch

Chain dimensions

All sprocket chain sizes

Compare all 19 chain sizes in the Sprockets chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
  4. Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
  5. Ametric: American Standard (ANSI) roller chain dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.