32212 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 322 series (light, wide)
The 32212 is a tapered roller bearing (322 series, light, wide): 60 mm (2.3622 in) bore, 110 mm (4.3307 in) outside diameter and 29.75 mm (1.1713 in) total width. The cone is 28 mm (1.1024 in) wide and the cup 24 mm (0.9449 in).
- dBore diameter
- 60 mm2.3622 in2.3622 in60 mm
- DOutside diameter
- 110 mm4.3307 in4.3307 in110 mm
- TTotal width
- 29.75 mm1.1713 in1.1713 in29.75 mm
Drawing
32212 specifications
| dBore diameter | 60 mm2.3622 in |
|---|---|
| DOutside diameter | 110 mm4.3307 in |
| TTotal width | 29.75 mm1.1713 in |
| BCone width | 28 mm1.1024 in |
| CCup width | 24 mm0.9449 in |
Also known as
32212J2/QHR32212J4T-3221232212-A32212-XL32212JR32212U
Other tapered roller bearings with a 60 mm bore
Same 60 mm bore in other bearing types
6012Ball Bearings6212Ball Bearings6312Ball Bearings7012Angular Contact Bearings7212Angular Contact Bearings7312Angular Contact BearingsNU212Cylindrical Roller BearingsNU312Cylindrical Roller BearingsNU2212Cylindrical Roller Bearings22212Spherical Roller Bearings22312Spherical Roller Bearings21312Spherical Roller Bearings1212Self-Aligning Ball Bearings1312Self-Aligning Ball Bearings2212Self-Aligning Ball Bearings51112Thrust Ball Bearings51212Thrust Ball Bearings51312Thrust Ball BearingsNA4912Needle Roller BearingsUC212Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.