32013 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32013 X is a tapered roller bearing (320 X series, extra light, wide): 65 mm (2.5591 in) bore, 100 mm (3.9370 in) outside diameter and 23 mm (0.9055 in) total width. The cone is 23 mm (0.9055 in) wide and the cup 17.5 mm (0.6890 in).
- dBore diameter
- 65 mm2.5591 in2.5591 in65 mm
- DOutside diameter
- 100 mm3.9370 in3.9370 in100 mm
- TTotal width
- 23 mm0.9055 in0.9055 in23 mm
Drawing
32013 X specifications
| dBore diameter | 65 mm2.5591 in |
|---|---|
| DOutside diameter | 100 mm3.9370 in |
| TTotal width | 23 mm0.9055 in |
| BCone width | 23 mm0.9055 in |
| CCup width | 17.5 mm0.6890 in |
Also known as
HR32013XJ4T-32013X32013-X-XL32013JR32013J2/QHR32013J4T-3201332013-A32013-XL32013U
Other tapered roller bearings with a 65 mm bore
Same 65 mm bore in other bearing types
6013Ball Bearings6213Ball Bearings6313Ball Bearings7013Angular Contact Bearings7213Angular Contact Bearings7313Angular Contact BearingsNU213Cylindrical Roller BearingsNU313Cylindrical Roller BearingsNU2213Cylindrical Roller Bearings21313Spherical Roller Bearings22213Spherical Roller Bearings22313Spherical Roller Bearings1213Self-Aligning Ball Bearings1313Self-Aligning Ball Bearings2213Self-Aligning Ball Bearings51113Thrust Ball Bearings51213Thrust Ball Bearings51313Thrust Ball BearingsNA4913Needle Roller BearingsUC213Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.