32017 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32017 X is a tapered roller bearing (320 X series, extra light, wide): 85 mm (3.3465 in) bore, 130 mm (5.1181 in) outside diameter and 29 mm (1.1417 in) total width. The cone is 29 mm (1.1417 in) wide and the cup 22 mm (0.8661 in).
- dBore diameter
- 85 mm3.3465 in3.3465 in85 mm
- DOutside diameter
- 130 mm5.1181 in5.1181 in130 mm
- TTotal width
- 29 mm1.1417 in1.1417 in29 mm
Drawing
32017 X specifications
| dBore diameter | 85 mm3.3465 in |
|---|---|
| DOutside diameter | 130 mm5.1181 in |
| TTotal width | 29 mm1.1417 in |
| BCone width | 29 mm1.1417 in |
| CCup width | 22 mm0.8661 in |
Also known as
HR32017XJ4T-32017X32017-X-XL32017JR32017J2/QHR32017J4T-3201732017-A32017-XL32017U
Other tapered roller bearings with a 85 mm bore
Same 85 mm bore in other bearing types
6017Ball Bearings6217Ball Bearings6317Ball Bearings7017Angular Contact Bearings7217Angular Contact Bearings7317Angular Contact BearingsNU217Cylindrical Roller BearingsNU317Cylindrical Roller BearingsNU2217Cylindrical Roller Bearings21317Spherical Roller Bearings22217Spherical Roller Bearings22317Spherical Roller Bearings1217Self-Aligning Ball Bearings1317Self-Aligning Ball Bearings2217Self-Aligning Ball Bearings51117Thrust Ball Bearings51217Thrust Ball Bearings51317Thrust Ball BearingsNA4917Needle Roller BearingsUC217Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.