32016 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32016 X is a tapered roller bearing (320 X series, extra light, wide): 80 mm (3.1496 in) bore, 125 mm (4.9213 in) outside diameter and 29 mm (1.1417 in) total width. The cone is 29 mm (1.1417 in) wide and the cup 22 mm (0.8661 in).
- dBore diameter
- 80 mm3.1496 in3.1496 in80 mm
- DOutside diameter
- 125 mm4.9213 in4.9213 in125 mm
- TTotal width
- 29 mm1.1417 in1.1417 in29 mm
Drawing
32016 X specifications
| dBore diameter | 80 mm3.1496 in |
|---|---|
| DOutside diameter | 125 mm4.9213 in |
| TTotal width | 29 mm1.1417 in |
| BCone width | 29 mm1.1417 in |
| CCup width | 22 mm0.8661 in |
Also known as
HR32016XJ4T-32016X32016-X-XL32016JR32016J2/QHR32016J4T-3201632016-A32016-XL32016U
Other tapered roller bearings with a 80 mm bore
Same 80 mm bore in other bearing types
6016Ball Bearings6216Ball Bearings6316Ball Bearings7016Angular Contact Bearings7216Angular Contact Bearings7316Angular Contact BearingsNU216Cylindrical Roller BearingsNU316Cylindrical Roller BearingsNU2216Cylindrical Roller Bearings22316Spherical Roller Bearings21316Spherical Roller Bearings22216Spherical Roller Bearings1216Self-Aligning Ball Bearings1316Self-Aligning Ball Bearings2216Self-Aligning Ball Bearings51116Thrust Ball Bearings51216Thrust Ball Bearings51316Thrust Ball BearingsNA4916Needle Roller BearingsUC216Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.