32211 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 322 series (light, wide)
The 32211 is a tapered roller bearing (322 series, light, wide): 55 mm (2.1654 in) bore, 100 mm (3.9370 in) outside diameter and 26.75 mm (1.0531 in) total width. The cone is 25 mm (0.9843 in) wide and the cup 21 mm (0.8268 in).
- dBore diameter
- 55 mm2.1654 in2.1654 in55 mm
- DOutside diameter
- 100 mm3.9370 in3.9370 in100 mm
- TTotal width
- 26.75 mm1.0531 in1.0531 in26.75 mm
Drawing
32211 specifications
| dBore diameter | 55 mm2.1654 in |
|---|---|
| DOutside diameter | 100 mm3.9370 in |
| TTotal width | 26.75 mm1.0531 in |
| BCone width | 25 mm0.9843 in |
| CCup width | 21 mm0.8268 in |
Also known as
32211J2/QHR32211J4T-3221132211-A32211-XL32211JR32211U
Other tapered roller bearings with a 55 mm bore
Same 55 mm bore in other bearing types
6011Ball Bearings6211Ball Bearings6311Ball Bearings7011Angular Contact Bearings7211Angular Contact Bearings7311Angular Contact BearingsNU211Cylindrical Roller BearingsNU311Cylindrical Roller BearingsNU2211Cylindrical Roller Bearings21311Spherical Roller Bearings22211Spherical Roller Bearings22311Spherical Roller Bearings1211Self-Aligning Ball Bearings1311Self-Aligning Ball Bearings2211Self-Aligning Ball Bearings51111Thrust Ball Bearings51211Thrust Ball Bearings51311Thrust Ball BearingsNA4911Needle Roller BearingsUC211Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.