32310 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 323 series (medium, wide)
The 32310 is a tapered roller bearing (323 series, medium, wide): 50 mm (1.9685 in) bore, 110 mm (4.3307 in) outside diameter and 42.25 mm (1.6634 in) total width. The cone is 40 mm (1.5748 in) wide and the cup 33 mm (1.2992 in).
- dBore diameter
- 50 mm1.9685 in1.9685 in50 mm
- DOutside diameter
- 110 mm4.3307 in4.3307 in110 mm
- TTotal width
- 42.25 mm1.6634 in1.6634 in42.25 mm
Drawing
32310 specifications
| dBore diameter | 50 mm1.9685 in |
|---|---|
| DOutside diameter | 110 mm4.3307 in |
| TTotal width | 42.25 mm1.6634 in |
| BCone width | 40 mm1.5748 in |
| CCup width | 33 mm1.2992 in |
Also known as
32310J2/QHR32310J4T-3231032310-A32310-XL32310JR32310U
Other tapered roller bearings with a 50 mm bore
Same 50 mm bore in other bearing types
6010Ball Bearings6210Ball Bearings6310Ball Bearings7210Angular Contact Bearings7310Angular Contact Bearings3210Angular Contact BearingsNU210Cylindrical Roller BearingsNU310Cylindrical Roller BearingsNU2210Cylindrical Roller Bearings21310Spherical Roller Bearings22210Spherical Roller Bearings22310Spherical Roller Bearings1210Self-Aligning Ball Bearings2310Self-Aligning Ball Bearings1310Self-Aligning Ball Bearings51110Thrust Ball Bearings51210Thrust Ball Bearings51310Thrust Ball BearingsNA4910Needle Roller BearingsUC210Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.