32309 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 323 series (medium, wide)
The 32309 is a tapered roller bearing (323 series, medium, wide): 45 mm (1.7717 in) bore, 100 mm (3.9370 in) outside diameter and 38.25 mm (1.5059 in) total width. The cone is 36 mm (1.4173 in) wide and the cup 30 mm (1.1811 in).
- dBore diameter
- 45 mm1.7717 in1.7717 in45 mm
- DOutside diameter
- 100 mm3.9370 in3.9370 in100 mm
- TTotal width
- 38.25 mm1.5059 in1.5059 in38.25 mm
Drawing
32309 specifications
| dBore diameter | 45 mm1.7717 in |
|---|---|
| DOutside diameter | 100 mm3.9370 in |
| TTotal width | 38.25 mm1.5059 in |
| BCone width | 36 mm1.4173 in |
| CCup width | 30 mm1.1811 in |
Also known as
32309J2/QHR32309J4T-3230932309-A32309-XL32309JR32309U
Other tapered roller bearings with a 45 mm bore
Same 45 mm bore in other bearing types
6009Ball Bearings6209Ball Bearings6309Ball Bearings7009Angular Contact Bearings7209Angular Contact Bearings7309Angular Contact BearingsNU209Cylindrical Roller BearingsNU309Cylindrical Roller BearingsNU2209Cylindrical Roller Bearings21309Spherical Roller Bearings22209Spherical Roller Bearings22309Spherical Roller Bearings1209Self-Aligning Ball Bearings1309Self-Aligning Ball Bearings2209Self-Aligning Ball Bearings51109Thrust Ball Bearings51209Thrust Ball Bearings51309Thrust Ball BearingsNA4909Needle Roller BearingsUC209Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.