32315 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 323 series (medium, wide)
The 32315 is a tapered roller bearing (323 series, medium, wide): 75 mm (2.9528 in) bore, 160 mm (6.2992 in) outside diameter and 58 mm (2.2835 in) total width. The cone is 55 mm (2.1654 in) wide and the cup 45 mm (1.7717 in).
- dBore diameter
- 75 mm2.9528 in2.9528 in75 mm
- DOutside diameter
- 160 mm6.2992 in6.2992 in160 mm
- TTotal width
- 58 mm2.2835 in2.2835 in58 mm
Drawing
32315 specifications
| dBore diameter | 75 mm2.9528 in |
|---|---|
| DOutside diameter | 160 mm6.2992 in |
| TTotal width | 58 mm2.2835 in |
| BCone width | 55 mm2.1654 in |
| CCup width | 45 mm1.7717 in |
Also known as
32315J2/QHR32315J4T-3231532315-A32315-XL32315JR32315U
Other tapered roller bearings with a 75 mm bore
Same 75 mm bore in other bearing types
6015Ball Bearings6215Ball Bearings6315Ball Bearings7015Angular Contact Bearings7215Angular Contact Bearings7315Angular Contact BearingsNU215Cylindrical Roller BearingsNU315Cylindrical Roller BearingsNU2215Cylindrical Roller Bearings22215Spherical Roller Bearings21315Spherical Roller Bearings22315Spherical Roller Bearings1215Self-Aligning Ball Bearings1315Self-Aligning Ball Bearings2215Self-Aligning Ball Bearings51115Thrust Ball Bearings51215Thrust Ball Bearings51315Thrust Ball BearingsNA4915Needle Roller BearingsUC215Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.