Tile Size Chart: Nominal Inch and Metric Sizes
Common nominal tile sizes and how many it takes to cover an area. Tile is sold by nominal size: a "12 × 24" can be 11-3/4 × 23-1/2 in and a 60 × 60 cm tile 597 mm, so read the work size on the box before setting out joints.
Size chartSort by any column, or filter to find a row
| Tile | WWidthmminmm · in | LLengthmminmm · in | Tile aream²ft²m² · ft² | Tiles per m² (no joint) | Tiles per ft² (no joint) | Large format (edge ≥ 15 in) |
|---|---|---|---|---|---|---|
| Inch sizes: mosaic and wall (≤ 4 in wide) | ||||||
| 1 × 1 in | 251 | 251 | 0.00060.01 | 1550 | 144 | No |
| 2 × 2 in | 512 | 512 | 0.00260.03 | 387.5 | 36 | No |
| 3 × 6 in | 763 | 1526 | 0.01160.12 | 86.11 | 8 | No |
| 4 × 4 in | 1024 | 1024 | 0.01030.11 | 96.88 | 9 | No |
| 2 × 8 in | 512 | 2038 | 0.01030.11 | 96.88 | 9 | No |
| 4 × 12 in | 1024 | 30512 | 0.0310.33 | 32.29 | 3 | No |
| Inch sizes: floor, plank and large format | ||||||
| 6 × 6 in | 1526 | 1526 | 0.02320.25 | 43.06 | 4 | No |
| 8 × 8 in | 2038 | 2038 | 0.04130.44 | 24.22 | 2.25 | No |
| 6 × 24 in | 1526 | 61024 | 0.09291.00 | 10.76 | 1 | Yes |
| 6 × 36 in | 1526 | 91436 | 0.13941.50 | 7.18 | 0.67 | Yes |
| 8 × 48 in | 2038 | 121948 | 0.24772.67 | 4.04 | 0.38 | Yes |
| 12 × 12 in | 30512 | 30512 | 0.09291.00 | 10.76 | 1 | No |
| 12 × 24 in | 30512 | 61024 | 0.18582.00 | 5.38 | 0.5 | Yes |
| 18 × 18 in | 45718 | 45718 | 0.2092.25 | 4.78 | 0.44 | Yes |
| 24 × 24 in | 61024 | 61024 | 0.37164.00 | 2.69 | 0.25 | Yes |
| 24 × 48 in | 61024 | 121948 | 0.74328.00 | 1.35 | 0.13 | Yes |
| 32 × 32 in | 81332 | 81332 | 0.66067.11 | 1.51 | 0.14 | Yes |
| 48 × 48 in | 121948 | 121948 | 1.486416.00 | 0.67 | 0.06 | Yes |
| Metric sizes under 38 cm | ||||||
| 10 × 10 cm | 1003.94 | 1003.94 | 0.010.11 | 100 | 9.29 | No |
| 15 × 15 cm | 1505.91 | 1505.91 | 0.02250.24 | 44.44 | 4.13 | No |
| 7.5 × 15 cm | 752.95 | 1505.91 | 0.01130.12 | 88.89 | 8.26 | No |
| 10 × 30 cm | 1003.94 | 30011.81 | 0.030.32 | 33.33 | 3.1 | No |
| 20 × 20 cm | 2007.87 | 2007.87 | 0.040.43 | 25 | 2.32 | No |
| 30 × 30 cm | 30011.81 | 30011.81 | 0.090.97 | 11.11 | 1.03 | No |
| Metric large format | ||||||
| 30 × 60 cm | 30011.81 | 60023.62 | 0.181.94 | 5.56 | 0.52 | Yes |
| 20 × 120 cm | 2007.87 | 120047.24 | 0.242.58 | 4.17 | 0.39 | Yes |
| 45 × 90 cm | 45017.72 | 90035.43 | 0.4054.36 | 2.47 | 0.23 | Yes |
| 60 × 60 cm | 60023.62 | 60023.62 | 0.363.88 | 2.78 | 0.26 | Yes |
| 80 × 80 cm | 80031.5 | 80031.5 | 0.646.89 | 1.56 | 0.15 | Yes |
| 60 × 120 cm | 60023.62 | 120047.24 | 0.727.75 | 1.39 | 0.13 | Yes |
| Panels and slabs (≥ 1 m²) | ||||||
| 75 × 150 cm | 75029.53 | 150059.06 | 1.12512.11 | 0.89 | 0.08 | Yes |
| 120 × 120 cm | 120047.24 | 120047.24 | 1.4415.50 | 0.69 | 0.06 | Yes |
| 120 × 240 cm | 120047.24 | 240094.49 | 2.8831.00 | 0.35 | 0.03 | Yes |
| 120 × 278 cm | 120047.24 | 2780109.45 | 3.33635.91 | 0.3 | 0.03 | Yes |
| 160 × 320 cm | 160062.99 | 3200125.98 | 5.1255.11 | 0.2 | 0.02 | Yes |
No exact match. The nearest sizes:
Nominal size, work size and rectified tile
The nominal size is the sales name; the work size (actual facial dimension) is chosen by the maker and printed on the box, often a few millimetres or 1/8–1/4 in smaller so the nominal size is reached with a joint.
Rectified tiles are ground square after firing to a tight size tolerance, which allows narrow joints (2–3 mm, 1/8 in). Pressed, non-rectified (cushion-edge) tile varies more and needs 3–6 mm (1/8–3/16 in) or wider.
Large format tile (LFT) means any edge of 15 in (381 mm) or more. LFT needs a flatter substrate (TCNA: 1/8 in in 10 ft and 1/16 in in 24 in) and a medium-bed or LHT mortar; offset planks no more than 1/3 of the length to limit lippage from tile warpage.
About Tile Sizes
Grout joint: ANSI A108.02 requires the joint to be at least three times the actual size variation of the tiles and never less than 1/16 in; for rectified porcelain the TCNA recommends at least 1/8 in. Mosaics usually come on sheets with the joint built in.
Counts in the chart use the nominal size with no joint and no waste. For a real order add 10 % for straight lay, 15 % for diagonal or herringbone, and buy extra from the same lot (shade and caliber are on the box) for future repairs.
Traditional US wall tile is 4-1/4 × 4-1/4 in, sold as "4 × 4". Subway tile is 3 × 6 in; newer subways run 2 × 8, 4 × 12 and 3 × 12 in.
Metric tile is named in centimetres (60 × 60, 30 × 60). The 120 × 278 cm and 160 × 320 cm slabs are made for floor-to-ceiling walls and countertops and are usually 6–12 mm thick.
Questions
What are standard floor tile sizes?
12 × 12, 12 × 24, 18 × 18 and 24 × 24 in in the US; 30 × 60, 60 × 60 and 60 × 120 cm in metric markets. Wood-look planks are 6 × 24, 6 × 36 or 8 × 48 in (20 × 120 cm).
What size is subway tile?
Classic subway tile is 3 × 6 in (75 × 150 mm). Elongated subways are 2 × 8, 3 × 12 and 4 × 12 in.
What counts as large format tile?
Any tile with at least one edge 15 in (381 mm) or longer (ANSI). So 12 × 24 in and 30 × 60 cm are large format.
How many 12x24 tiles are in a square foot or square metre?
Each 12 × 24 in tile covers 2 ft², so 0.5 tiles per ft² or 5.38 per m² before joints and waste.
How wide should grout lines be?
At least 1/16 in and at least three times the tile's size variation (ANSI A108.02). For rectified porcelain 1/8 in (3 mm) is the practical minimum; non-rectified floor tile 3/16–1/4 in.
Sources
- ANSI A137.1: American National Standard Specifications for Ceramic Tile (facial dimensions, large format tile)
- ANSI A108.02: General requirements: materials, environmental and workmanship (grout joint width §4.3.8)
- Construction Specifier: Tile and stone lippage, what is acceptable (A108.02 joint rules)
- TCNA Handbook for Ceramic, Glass, and Stone Tile Installation
- ISO 13006 / EN 14411: Ceramic tiles, definitions, classification, characteristics (nominal and work size)
- ANSI A137.3: Gauged porcelain tiles and gauged porcelain tile panels/slabs
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.