AT10 Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, metric AT (reinforced)

AT10 timing belts (Trapezoidal, metric AT, reinforced) have a 10 mm (0.394 in) pitch, a tooth height of 2.5 mm (0.098 in) and an overall belt height of about 5 mm (0.197 in). Common widths: 16, 25, 32, 50 mm. A pulley with z teeth has a pitch diameter of z × 10 mm / π.

pPitch
10 mm0.394 in0.394 in10 mm
hₜTooth height
2.5 mm0.098 in0.098 in2.5 mm
hₛBelt height (typical)
5 mm0.197 in0.197 in5 mm

Drawing

p = 10 mmp = 0.394 in5 mm0.197 in2.5 mm0.098 in2β = 50°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

AT10 specifications

pPitch10 mm0.394 in
hₜTooth height2.5 mm0.098 in
hₛBelt height (typical)5 mm0.197 in
sTooth width at root5 mm0.197 in
2βTooth flank angle50°
Tooth profileTrapezoidal
Common widths16, 25, 32, 50 mm

AT10 belt height is listed at 4.5 mm (some polyurethane belts) to 5.0 mm (Optibelt, ISO 17396). AT belts need AT pulleys; the wider tooth will not seat in a T10 pulley.

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.