AT5 Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, metric AT (reinforced)

AT5 timing belts (Trapezoidal, metric AT, reinforced) have a 5 mm (0.197 in) pitch, a tooth height of 1.2 mm (0.047 in) and an overall belt height of about 2.7 mm (0.106 in). Common widths: 10, 16, 25, 32 mm. A pulley with z teeth has a pitch diameter of z × 5 mm / π.

pPitch
5 mm0.197 in0.197 in5 mm
hₜTooth height
1.2 mm0.047 in0.047 in1.2 mm
hₛBelt height (typical)
2.7 mm0.106 in0.106 in2.7 mm

Drawing

p = 5 mmp = 0.197 in2.7 mm0.106 in1.2 mm0.047 in2β = 50°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

AT5 specifications

pPitch5 mm0.197 in
hₜTooth height1.2 mm0.047 in
hₛBelt height (typical)2.7 mm0.106 in
sTooth width at root2.5 mm0.098 in
2βTooth flank angle50°
Tooth profileTrapezoidal
Common widths10, 16, 25, 32 mm

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.