HTD 14M Timing Belt Profile Dimensions

Timing Belts · Curvilinear HTD (ISO 13050)

HTD 14M timing belts (Curvilinear HTD, ISO 13050) have a 14 mm (0.551 in) pitch, a tooth height of 6 mm (0.236 in) and an overall belt height of about 10 mm (0.394 in). Common widths: 40, 55, 85, 115, 170 mm. A pulley with z teeth has a pitch diameter of z × 14 mm / π.

pPitch
14 mm0.551 in0.551 in14 mm
hₜTooth height
6 mm0.236 in0.236 in6 mm
hₛBelt height (typical)
10 mm0.394 in0.394 in10 mm

Drawing

pitch linep = 14 mmp = 0.551 in10 mm0.394 in6 mm0.236 in
Two pitches, teeth down. Pitch and heights to scale; the curved tooth outline is simplified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

HTD 14M specifications

pPitch14 mm0.551 in
hₜTooth height6 mm0.236 in
hₛBelt height (typical)10 mm0.394 in
uPitch line differential (PLD)1.397 mm0.055 in
Tooth profileCurvilinear (round)
Common widths40, 55, 85, 115, 170 mm

Also known as

14M

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.