HTD 8M Timing Belt Profile Dimensions

Timing Belts · Curvilinear HTD (ISO 13050)

HTD 8M timing belts (Curvilinear HTD, ISO 13050) have a 8 mm (0.315 in) pitch, a tooth height of 3.4 mm (0.134 in) and an overall belt height of about 5.6 mm (0.220 in). Common widths: 20, 30, 50, 85 mm. A pulley with z teeth has a pitch diameter of z × 8 mm / π.

pPitch
8 mm0.315 in0.315 in8 mm
hₜTooth height
3.4 mm0.134 in0.134 in3.4 mm
hₛBelt height (typical)
5.6 mm0.220 in0.220 in5.6 mm

Drawing

pitch linep = 8 mmp = 0.315 in5.6 mm0.220 in3.4 mm0.134 in
Two pitches, teeth down. Pitch and heights to scale; the curved tooth outline is simplified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

HTD 8M specifications

pPitch8 mm0.315 in
hₜTooth height3.4 mm0.134 in
hₛBelt height (typical)5.6 mm0.220 in
uPitch line differential (PLD)0.686 mm0.027 in
Tooth profileCurvilinear (round)
Common widths20, 30, 50, 85 mm

Overall belt height is 5.6 mm in Gates' tables and 6.0 mm in several other catalogues; the tooth height (3.4 mm) is common to all.

Also known as

8M

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.