MXL Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, inch (ISO 5296)

MXL timing belts (Trapezoidal, inch, ISO 5296) have a 2.032 mm (0.080 in) pitch, a tooth height of 0.51 mm (0.020 in) and an overall belt height of about 1.14 mm (0.045 in). Common widths: 3.2, 4.8, 6.4 (1/8", 3/16", 1/4"). A pulley with z teeth has a pitch diameter of z × 2.032 mm / π.

pPitch
2.032 mm0.080 in0.080 in2.032 mm
hₜTooth height
0.51 mm0.020 in0.020 in0.51 mm
hₛBelt height (typical)
1.14 mm0.045 in0.045 in1.14 mm

Drawing

pitch linep = 2.032 mmp = 0.080 in1.14 mm0.045 in0.51 mm0.020 in2β = 40°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

MXL specifications

pPitch2.032 mm0.080 in
hₜTooth height0.51 mm0.020 in
hₛBelt height (typical)1.14 mm0.045 in
sTooth width at root1.14 mm0.045 in
2βTooth flank angle40°
uPitch line differential (PLD)0.254 mm0.010 in
Tooth profileTrapezoidal
Common widths3.2, 4.8, 6.4 (1/8", 3/16", 1/4")

MXL pitch is 0.080" (2.032 mm): close to 2 mm, so MXL and GT2 2 mm belts are often confused. They are not interchangeable.

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.