XL Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, inch (ISO 5296)

XL timing belts (Trapezoidal, inch, ISO 5296) have a 5.08 mm (0.200 in) pitch, a tooth height of 1.27 mm (0.050 in) and an overall belt height of about 2.3 mm (0.091 in). Common widths: 6.4, 7.9, 9.5 (1/4", 5/16", 3/8"). A pulley with z teeth has a pitch diameter of z × 5.08 mm / π.

pPitch
5.08 mm0.200 in0.200 in5.08 mm
hₜTooth height
1.27 mm0.050 in0.050 in1.27 mm
hₛBelt height (typical)
2.3 mm0.091 in0.091 in2.3 mm

Drawing

pitch linep = 5.08 mmp = 0.200 in2.3 mm0.091 in1.27 mm0.050 in2β = 50°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

XL specifications

pPitch5.08 mm0.200 in
hₜTooth height1.27 mm0.050 in
hₛBelt height (typical)2.3 mm0.091 in
sTooth width at root2.57 mm0.101 in
2βTooth flank angle50°
uPitch line differential (PLD)0.254 mm0.010 in
Tooth profileTrapezoidal
Common widths6.4, 7.9, 9.5 (1/4", 5/16", 3/8")

XL is 1/5 inch (5.08 mm) pitch. That is close to 5 mm but not compatible with T5, HTD 5M or GT2 5 mm pulleys: after ten teeth the error is already 0.8 mm.

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.