S2M Timing Belt Profile Dimensions
Timing Belts · STD / Super Torque (S..M)
S2M timing belts (STD / Super Torque, S..M) have a 2 mm (0.079 in) pitch, a tooth height of 0.76 mm (0.030 in) and an overall belt height of about 1.36 mm (0.054 in). Common widths: 4, 6, 10 mm. A pulley with z teeth has a pitch diameter of z × 2 mm / π.
- pPitch
- 2 mm0.079 in0.079 in2 mm
- hₜTooth height
- 0.76 mm0.030 in0.030 in0.76 mm
- hₛBelt height (typical)
- 1.36 mm0.054 in0.054 in1.36 mm
Drawing
S2M specifications
| pPitch | 2 mm0.079 in |
|---|---|
| hₜTooth height | 0.76 mm0.030 in |
| hₛBelt height (typical) | 1.36 mm0.054 in |
| Tooth profile | Curvilinear, flat tip |
| Common widths | 4, 6, 10 mm |
Other profiles with the same pitch (not interchangeable)
All timing belt profiles
Sources
- ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
- ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
- Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
- Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
- Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
- Pfeifer Industries: Timing belt tooth profiles and pitches
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.