T2.5 Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, metric T (DIN 7721)

T2.5 timing belts (Trapezoidal, metric T, DIN 7721) have a 2.5 mm (0.098 in) pitch, a tooth height of 0.7 mm (0.028 in) and an overall belt height of about 1.3 mm (0.051 in). Common widths: 4, 6, 10 mm. A pulley with z teeth has a pitch diameter of z × 2.5 mm / π.

pPitch
2.5 mm0.098 in0.098 in2.5 mm
hₜTooth height
0.7 mm0.028 in0.028 in0.7 mm
hₛBelt height (typical)
1.3 mm0.051 in0.051 in1.3 mm

Drawing

p = 2.5 mmp = 0.098 in1.3 mm0.051 in0.7 mm0.028 in2β = 40°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

T2.5 specifications

pPitch2.5 mm0.098 in
hₜTooth height0.7 mm0.028 in
hₛBelt height (typical)1.3 mm0.051 in
sTooth width at root1.5 mm0.059 in
2βTooth flank angle40°
Tooth profileTrapezoidal
Common widths4, 6, 10 mm

Also known as

T2,5

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.