T5 Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, metric T (DIN 7721)

T5 timing belts (Trapezoidal, metric T, DIN 7721) have a 5 mm (0.197 in) pitch, a tooth height of 1.2 mm (0.047 in) and an overall belt height of about 2.2 mm (0.087 in). Common widths: 6, 10, 16, 25 mm. A pulley with z teeth has a pitch diameter of z × 5 mm / π.

pPitch
5 mm0.197 in0.197 in5 mm
hₜTooth height
1.2 mm0.047 in0.047 in1.2 mm
hₛBelt height (typical)
2.2 mm0.087 in0.087 in2.2 mm

Drawing

p = 5 mmp = 0.197 in2.2 mm0.087 in1.2 mm0.047 in2β = 40°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

T5 specifications

pPitch5 mm0.197 in
hₜTooth height1.2 mm0.047 in
hₛBelt height (typical)2.2 mm0.087 in
sTooth width at root2.65 mm0.104 in
2βTooth flank angle40°
Tooth profileTrapezoidal
Common widths6, 10, 16, 25 mm

The most common metric trapezoidal belt, mostly polyurethane with steel cords. T5 pulleys do not suit AT5 belts or HTD 5M belts, even though the pitch is the same.

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.