Tire Valve Stem Sizes: TR413, TR414, TR418, Presta, Schrader and Dunlop
Car valve stems fit a 0.453 in (11.5 mm) rim hole and differ mainly in length: TR412 0.88 in, TR413 1.25 in, TR414 1.5 in, TR418 2 in. Snap-in rubber stems are rated 65 psi. Bicycle rims are drilled 6.5 mm for Presta and 8.5 mm for Schrader or Dunlop valves.
Size chartSort by any column, or filter to find a row
| Valve | Type | ⌀Rim holemminmm · in | LEffective lengthmminmm · in | Max. pressure | Use |
|---|---|---|---|---|---|
| Car and light truck (TR numbers) | |||||
| TR412 | Snap-in rubber | 11.50.453 | 22.40.88 | 65 psi | small wheels, low-profile rims with little room |
| TR413 | Snap-in rubber | 11.50.453 | 31.81.25 | 65 psi | the standard passenger-car valve |
| TR414 | Snap-in rubber | 11.50.453 | 38.11.5 | 65 psi | deeper rims, hubcaps |
| TR418 | Snap-in rubber | 11.50.453 | 50.82 | 65 psi | wheels with deep center or hubcaps |
| TR425 | Snap-in rubber | 15.90.625 | 50.82 | 65 psi | deep wheels, trailers |
| TR415 (large bore) | Snap-in rubber | 15.90.625 | 31.81.25 | 65 psi | wheels drilled 0.625 in (some trucks, trailers, older wheels) |
| TR600HP series | Snap-in rubber | 11.50.453 | — | up to 100 psi | light trucks and trailers above 65 psi |
| Clamp-in (metal, TPMS) | Clamp-in metal | 11.50.453 | — | up to 200 psi (typical) | TPMS sensors, high-speed and performance wheels |
| Bicycle valves | |||||
| Schrader (bicycle) | Bicycle tube / tubeless | 8.50.335 | — | about 100 psi (tube rating) | kids', hybrid and mountain bikes, e-bikes |
| Presta (French) | Bicycle tube / tubeless | 6.50.256 | — | high pressure (road) | road, gravel and most quality bikes; tubeless valves |
| Dunlop / Woods | Bicycle tube / tubeless | 8.50.335 | — | about 65 psi | city and Dutch bikes in Europe and Asia |
No exact match. The nearest sizes:
Reading TR numbers and choosing a length
TR numbers come from the Tire and Rim Association. For snap-in valves the number sets the rim hole and the effective length, measured from the rim seat to the end of the cap thread. All of TR412, 413, 414, 418 and 425 fit a 0.453 in (11.5 mm) hole; TR415 and TR416 fit a 0.625 in (15.9 mm) hole.
Pick a length that reaches past any hubcap or wheel cover enough to fit an air chuck, but does not stick out far enough to be hit; TR413 is the default for most steel and alloy car wheels. Snap-in rubber stems are limited to 65 psi cold and to the speed rating the maker states; above that use high-pressure snap-in (TR600HP) or metal clamp-in stems.
All car valves and Schrader bicycle valves share the same valve core and cap thread (8V1, 0.305 in × 32 TPI), so the same pump chuck and core tool fit. Cores unscrew with a valve core tool; torque is small, about 0.2–0.5 N·m.
About Tire Valves
Most cars sold since about 2008 have TPMS sensors, usually fixed to a clamp-in aluminum valve (or a snap-in rubber stem with a sensor). Replace the grommet, nut and core when tires are changed; the aluminum stem can seize and corrode if the nut is over-tightened or the cap missing.
Bicycles use three valves. Presta (French) is thin (6 mm body, 6 × 0.8 mm thread), needs its lock nut opened before inflating and fits narrow rims; Schrader is the car valve; Dunlop (Woods) shares the 8.5 mm rim hole with Schrader and is common on European and Asian city bikes. A Presta tube can go in a Schrader rim with an adapter grommet, but not the reverse without drilling the rim.
Tubeless bicycle valves are almost all Presta with a rubber base shaped for the rim bed; length (40–80 mm) must exceed the rim depth by about 15–20 mm.
Questions
What is the difference between TR413 and TR414?
Length: TR413 is 1.25 in effective length, TR414 1.5 in. Both fit a 0.453 in rim hole and are rated 65 psi.
What size hole is a valve stem?
0.453 in (11.5 mm) for most car and TPMS valves; 0.625 in (15.9 mm) for large-bore valves such as TR415/TR416. Bicycle rims: 6.5 mm for Presta, 8.5 mm for Schrader and Dunlop.
What does TR418 mean?
A snap-in rubber valve for a 0.453 in rim hole with 2.0 in effective length, rated 65 psi, for wheels with a deep center or wheel covers.
Can I put a Presta tube in a Schrader rim?
Yes, with a small adapter grommet or rim insert so the thin Presta valve does not move in the 8.5 mm hole. A Schrader valve does not fit a 6.5 mm Presta hole unless you drill the rim.
What thread is a Schrader valve?
The outside (cap) thread is 8V1, 0.305 in (7.75 mm) with 32 threads per inch; the core thread inside is 5V1, 0.209 in (5.31 mm) with 36 threads per inch. Presta valves use 6V1 (6 × 0.8 mm) on the body and 5V2 (5.2 mm × 24 TPI) at the tip.
Sources
- Tire and Rim Association: Year Book, tire valves (TR numbers, rim holes)
- Schrader (Sensata): Snap-in tire valve catalogue (TR412–TR425, effective length, 65 psi)
- Dill Air Controls: Valve stem catalogue (rim hole 0.453 / 0.625 in)
- Sheldon Brown: Bicycle valves (Presta, Schrader, Dunlop; rim holes)
- ISO 4570: Tyre valve threads (8V1 cap thread, 5V1 core thread)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.