Lug Nut Thread Size Chart by Make: Thread, Seat Type and Hex
Wheel nuts and bolts differ in three ways: thread (most cars use M12 × 1.5, M12 × 1.25 or M14 × 1.5), seat (60° conical, ball or flat) and hex size (17–22 mm). Japanese makes except Honda use conical seats; Honda, VW/Audi, Mercedes and Porsche use ball seats on their own wheels.
Size chartSort by any column, or filter to find a row
| Make | Thread | Seat (factory wheels) | Hex (factory nut)mmin | Exceptions and notes |
|---|---|---|---|---|
| Lug nuts on studs | ||||
| Ford (cars, SUVs) | M12 × 1.5 | Conical 60° | — | Focus (2009–2018), Fusion (2012–2018), Escape (2013–2020); larger Ford SUVs and trucks use other threads, check the model |
| Ford F-150 (2015 on) | M14 × 1.5 | Conical 60° | 210.827 | F-150 2004–2014: M14 × 2.0 |
| GM trucks and SUVs (Chevrolet, GMC, Cadillac) | M14 × 1.5 | Conical 60° | 220.866 | Silverado, Sierra, Tahoe, Suburban, Escalade; HD trucks M14 × 1.5 |
| GM cars (Chevrolet, Buick) | M12 × 1.5 | Conical 60° | — | Camaro and Corvette: M12 × 1.5 / M14 × 1.5 by year |
| Ram 1500 (2012 on) | M14 × 1.5 | Conical 60° | — | Dodge Ram 1500 up to 2011: 9/16-18; Ram 2500/3500: M14 × 1.5 |
| Chrysler, Dodge (cars) | M14 × 1.5 | Conical 60° | — | older models 1/2-20 |
| Jeep (Wrangler JL, Grand Cherokee WK2/WL) | M14 × 1.5 | Conical 60° | — | Wrangler JK 2007–2018 and older Jeeps: 1/2-20 UNF |
| Toyota, Lexus | M12 × 1.5 | Flat (mag) with washer | 210.827 | OEM alloy wheels: flat seat with washer (mag nut); OEM steel and aftermarket wheels: 60° conical. Tundra (2007 on), Land Cruiser, Sequoia: M14 × 1.5 |
| Honda, Acura | M12 × 1.5 | Ball (radius) | 190.748 | OEM nuts are ball (radius) seat; aftermarket wheels usually 60° conical. Some Acura and newer Pilot/Passport/Ridgeline M14 × 1.5 |
| Nissan, Infiniti | M12 × 1.25 | Conical 60° | — | Titan and Armada: M14 × 1.5 |
| Subaru | M12 × 1.25 | Conical 60° | 190.748 | — |
| Mazda | M12 × 1.5 | Conical 60° | — | — |
| Hyundai, Kia, Genesis | M12 × 1.5 | Conical 60° | — | — |
| Mitsubishi | M12 × 1.5 | Conical 60° | — | — |
| Tesla (Model 3, Y, S, X) | M14 × 1.5 | Conical 60° | 210.827 | — |
| Wheel bolts (lug bolts) | ||||
| Volkswagen, Audi, Škoda, SEAT | M14 × 1.5 | Ball (radius) | 170.669 | ball seat radius 13 mm (R13) on most; check bolt shank length for the wheel |
| Porsche | M14 × 1.5 | Ball (radius) | 190.748 | ball (radius) seat; center-lock wheels on some GT models |
| Mercedes-Benz | M14 × 1.5 | Ball (radius) | 170.669 | ball (radius) seat; older cars M12 × 1.5 |
| BMW, MINI (current) | M14 × 1.25 | Conical 60° | 170.669 | older BMW (E-series) and older MINI: M12 × 1.5; BMW bolts are 60° conical |
No exact match. The nearest sizes:
Reading a lug nut size
M12 × 1.5 means a 12 mm metric thread with 1.5 mm pitch. Inch threads are written 1/2-20 (½ in, 20 threads per inch) or 9/16-18. M12 × 1.5 and M12 × 1.25 look almost the same: a 1.25 nut will start on a 1.5 stud and then jam after a turn or two. Never force it. Check with a thread gauge or a known nut.
The seat is the face that centers the wheel and carries the clamp load. A conical nut in a ball-seat wheel (or the reverse) touches on a thin ring, works loose and can crack the wheel. The seat has to match the wheel: most aftermarket wheels are 60° conical even on Honda or VW, while Toyota and Lexus factory alloys need flat-seat nuts with a washer.
Hex size is the socket you need: 17 mm (VW, Mercedes, BMW bolts), 19 mm (3/4 in; Honda, Subaru), 21 mm (13/16 in; Toyota, Tesla), 22 mm (7/8 in; GM trucks). Locking nuts and aftermarket tuner nuts may use a smaller hex or a key.
About Lug Nut Threads
Thread size is set by the wheel studs (or the threaded holes in the hub for wheel bolts), so it stays the same when you change wheels. Seat type and, for bolts, shank length depend on the wheel: aftermarket wheels are thicker at the mounting pad and often need longer bolts.
European makes mostly use wheel bolts screwed into the hub; American and Asian makes use studs pressed into the hub with nuts. With bolts, hang the wheel on a guide pin when mounting, and check the thread engagement: at least about 6.5 turns for M12 × 1.5 and M14 × 1.5 is a common minimum.
This chart lists the main current fitment per make. Makes change threads between models and generations, and heavy-duty trucks use larger studs. Confirm in the owner's manual, on a wheel-fitment database, or by test-fitting one nut by hand before buying a set.
Common thread sizes
Thread, pitch and where you find it.
| Thread | Pitch | Typical makes |
|---|---|---|
| M12 × 1.25 | 1.25 mm | Nissan, Infiniti, Subaru |
| M12 × 1.5 | 1.5 mm | Toyota, Honda, Mazda, Hyundai, Kia, Mitsubishi, Ford Escape/Focus, GM cars, older BMW |
| M14 × 1.25 | 1.25 mm | BMW and MINI (current) |
| M14 × 1.5 | 1.5 mm | GM trucks, Ram, Jeep JL, Tesla, VW/Audi, Mercedes, Porsche, Toyota Tundra |
| M14 × 2.0 | 2.0 mm | Ford F-150 (2004–2014) |
| 1/2-20 UNF | 20 TPI | Older Ford, Jeep (to Wrangler JK), Chrysler |
| 9/16-18 UNF | 18 TPI | Dodge Ram (to 2011), many trailers |
Questions
What size are Toyota lug nuts?
M12 × 1.5 with a 21 mm hex on most Toyota and Lexus cars and small SUVs. Factory alloy wheels use flat-seat nuts with a washer; Tundra, Sequoia and Land Cruiser use M14 × 1.5.
What size are Honda lug nuts?
M12 × 1.5, 19 mm hex, ball (radius) seat on factory wheels. Aftermarket wheels usually need 60° conical nuts.
Are M12 × 1.5 and M12 × 1.25 interchangeable?
No. The pitch differs (1.5 vs 1.25 mm); the nut starts but jams after one or two turns and damages the stud.
What lug nuts fit a Ford F-150?
M14 × 1.5 with a 21 mm hex on 2015 and later trucks, 60° conical seat. 2004–2014 trucks use M14 × 2.0.
What is the difference between conical and ball seat lug nuts?
A conical seat is a 60° taper; a ball seat is a spherical radius (for example R13 on most VW and Audi bolts). They are not interchangeable: use the seat the wheel was made for.
What socket size do I need for lug nuts?
Usually 17 mm (European wheel bolts), 19 mm (Honda, Subaru), 21 mm (Toyota, Tesla, F-150) or 22 mm (GM trucks).
Sources
- Gorilla Automotive: Lug nut application guide
- McGard: Wheel lock and lug nut application guide
- Wheel-Size.com: Wheel fitment data (thread size, seat, hex) by vehicle
- Speedway Motors: What lug nuts fit my car or truck
- The Lug Nut Source: Lug nut fitment guide (thread by make)
- WheelOffset: Chrysler lug nut size guide
- Wikipedia: Lug nut (seat types and common threads)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.