6-way round Trailer Plug Wiring Diagram

Trailer Connectors · North America (SAE)

The 6-way round trailer connector has 6 contacts and follows SAE J1239 (pin layout varies by maker). Used on horse and livestock trailers, older campers with electric brakes. Pin functions and the standard wire colors are below.

Contacts
6
Standard
SAE J1239 (pin layout varies by maker)

Drawing

Ground (white)Tail, license and side-marker lights (brown)Left turn and stop (yellow)Right turn and stop (green)Electric brakes (blue)Center: reverse lights (purple) or +12 V auxiliary (black), by make (purple)
Wiring chart by function, with the contact number where the standard numbers the contacts (moulded into the plug face). Dashed: no standard color.Proportions shown, not to scale

6-way round specifications

Contacts6
StandardSAE J1239 (pin layout varies by maker)
Typical usehorse and livestock trailers, older campers with electric brakes

6-way round pinout

ContactFunctionWire color
—Groundwhite
—Tail, license and side-marker lightsbrown
—Left turn and stopyellow
—Right turn and stopgreen
—Electric brakesblue
—Center: reverse lights (purple) or +12 V auxiliary (black), by makepurple

Pin positions in 6-way round plugs differ between makers, and so does the center pin: reverse lights on some, +12 V auxiliary on others. Identify each contact by the letters moulded into the plug and a test light.

Other trailer connectors

All Trailer Connectors sizes

Compare all 7 sizes in the Trailer Connectors chart →

Sources

  1. SAE J1239: Four-, five- and six-conductor trailer connectors
  2. SAE J2863: Automotive and light truck trailer electrical connector (7-way blade)
  3. SAE J560: Primary and auxiliary seven-conductor electrical connector for truck-trailer jumper cable
  4. ISO 1724: Road vehicles, connectors for the electrical connection of towing and towed vehicles, 7-pole type 12 N
  5. ISO 11446-1: Road vehicles, connectors for towing vehicles, 13-pole, 12 V
  6. Pollak / Hopkins: Trailer wiring diagrams and color codes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.