Trailer Wiring Diagrams: 4-Way, 5-Way, 6-Way, 7-Way RV Blade, 7-Pin and 13-Pin Pinouts

Trailer connectors carry the lights, brakes and charging line. The 4-way flat has white ground, brown tail lights, yellow left and green right turn/stop. The 7-way RV blade (SAE J2863) adds blue electric brakes, a +12 V charge line and a center reverse pin; beware that many RV trailers use a second color code on the 7-way (green tail, red left, brown right). European trailers use the 7-pin ISO 1724 or 13-pin ISO 11446 plug.

7 sizesChecked 2026-11-156 sources

Size chartTap a size for its drawing and full specs

7 of 7
ConnectorContactsStandardTypical use
North America (SAE)
4-way flat4SAE J1239small utility, boat and light trailers without brakes
5-way flat5SAE J1239boat trailers with surge brakes (reverse lockout)
6-way round6SAE J1239 (pin layout varies by maker)horse and livestock trailers, older campers with electric brakes
7-way RV blade7SAE J2863campers, travel trailers and anything with electric brakes; standard on US pickups and SUVs
7-way round (SAE J560)7SAE J560semi-trailers and heavy commercial trailers (tractor to trailer)
Europe (ISO)
7-pin (ISO 1724, 12N)7ISO 1724European cars, trailers and older caravans (12 V)
13-pin (ISO 11446)13ISO 11446European cars and caravans (charging, fridge, reversing light)

Reading a trailer wiring diagram

Each contact has a function and, by convention, a wire color. The colors are an industry code, not a law: always check with a test light, especially on a trailer someone has rewired. The function assignment is the standard part (SAE J1239, J2863, J560, ISO 1724, ISO 11446).

US trailers mostly use combined stop and turn lamps: the left lamp carries left turn and brake on one wire. European trailers and many imported vehicles have separate stop and turn circuits; connecting a separate-circuit car to a US trailer needs a converter (taillight converter, 3-wire to 2-wire).

The ground (white) is the most common fault: a trailer that grounds only through the hitch ball gives dim, flickering or crosstalking lights. Run the white wire to a clean bolt on the trailer frame.

About Trailer Connectors

The 4-way flat is enough for lights only. Trailers with electric brakes need a brake controller in the tow vehicle and a connector with a brake wire: the 7-way RV blade in North America (also the 6-way round on older horse trailers). The 7-way also charges the trailer battery through its +12 V wire and switches reverse lights or a surge-brake lockout through the center pin.

Colors are where mistakes happen. On the vehicle side, the SAE colors of the 7-way match the 4-way (brown tail, yellow left, green right). Many RV and trailer builders wire the trailer side of the 7-way with an older RV code instead: green tail, red left turn, brown right turn, yellow center. Splicing by color between the two codes swaps tail and turn circuits. Always wire by function and check with a test light.

In Europe, cars and caravans moved from the 7-pin ISO 1724 ('12N') plug to the 13-pin ISO 11446, which adds a reversing light, permanent +12 V, a switched +12 V for the caravan fridge and charging, and separate grounds. Adapters between 7 and 13 pins are common, but the extra circuits are lost on a 7-pin car.

Two color codes for the 7-way RV blade

Function is fixed by SAE J2863; colors are not. Compare before you splice.

Circuit4/5-way flat7-way, SAE / vehicle-side colors7-way, common RV trailer colors7-way round J560
Groundwhitewhitewhitewhite
Tail / running lightsbrownbrowngreenbrown
Left turn / stopyellowyellowredyellow (turn only)
Right turn / stopgreengreenbrowngreen (turn only)
Electric brakes—bluebluenone (air brakes)
+12 V—blackblackblue (ABS / aux.)
Reverse / centerpurple (5-way)purpleyellow—

Questions

What are the wire colors for a 7-way trailer plug?

By SAE/vehicle-side colors: white ground, blue electric brakes, brown tail lights, black +12 V, yellow left turn/stop, green right turn/stop, purple center (reverse). Many RV trailers instead use green tail, red left, brown right and yellow center, so check by function.

What are the wire colors for a 4-way trailer plug?

White ground, brown tail/running lights, yellow left turn and stop, green right turn and stop.

What is the 13-pin trailer plug pinout?

1 left turn, 2 rear fog, 3 ground (1–8), 4 right turn, 5 right tail, 6 stop, 7 left tail, 8 reversing, 9 permanent +12 V, 10 switched +12 V, 11 ground for 10, 12 trailer detection, 13 ground for 9.

What is the 7-pin European (12N) pinout?

1 left turn (yellow), 2 rear fog (blue), 3 ground (white), 4 right turn (green), 5 right tail (brown), 6 stop (red), 7 left tail (black).

Why do my trailer lights flicker or work backwards?

Usually a bad ground: the white wire must go to clean metal on both vehicle and trailer frame. Lights that come on together point to a shared ground through the hitch ball.

Sources

  1. SAE J1239: Four-, five- and six-conductor trailer connectors
  2. SAE J2863: Automotive and light truck trailer electrical connector (7-way blade)
  3. SAE J560: Primary and auxiliary seven-conductor electrical connector for truck-trailer jumper cable
  4. ISO 1724: Road vehicles, connectors for the electrical connection of towing and towed vehicles, 7-pole type 12 N
  5. ISO 11446-1: Road vehicles, connectors for towing vehicles, 13-pole, 12 V
  6. Pollak / Hopkins: Trailer wiring diagrams and color codes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.