13-pin (ISO 11446) Trailer Plug Wiring Diagram
Trailer Connectors · Europe (ISO)
The 13-pin (ISO 11446) trailer connector has 13 contacts and follows ISO 11446. Used on European cars and caravans (charging, fridge, reversing light). Pin functions and the standard wire colors are below.
- Contacts
- 13
- Standard
- ISO 11446
Drawing
13-pin (ISO 11446) specifications
| Contacts | 13 |
|---|---|
| Standard | ISO 11446 |
| Typical use | European cars and caravans (charging, fridge, reversing light) |
13-pin (ISO 11446) pinout
| Contact | Function | Wire color |
|---|---|---|
| 1 | L: left turn signal | yellow |
| 2 | 54G: rear fog light | blue |
| 3 | 31: ground for contacts 1–8 | white |
| 4 | R: right turn signal | green |
| 5 | 58R: right tail and license light | brown |
| 6 | 54: stop lights | red |
| 7 | 58L: left tail light | black |
| 8 | Reversing light | — |
| 9 | +12 V permanent supply | — |
| 10 | +12 V switched supply (charging, fridge) | — |
| 11 | Ground for contact 10 | — |
| 12 | Trailer detection / coded | — |
| 13 | Ground for contact 9 | — |
Wire colors for contacts 8–13 vary between harness makers; identify them by contact number. Contacts 9 and 10 each have their own ground (13 and 11) so caravan loads do not share the lighting ground.
Also known as
JaegerMulticon
Other trailer connectors
All Trailer Connectors sizes
Sources
- SAE J1239: Four-, five- and six-conductor trailer connectors
- SAE J2863: Automotive and light truck trailer electrical connector (7-way blade)
- SAE J560: Primary and auxiliary seven-conductor electrical connector for truck-trailer jumper cable
- ISO 1724: Road vehicles, connectors for the electrical connection of towing and towed vehicles, 7-pole type 12 N
- ISO 11446-1: Road vehicles, connectors for towing vehicles, 13-pole, 12 V
- Pollak / Hopkins: Trailer wiring diagrams and color codes
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.