A V-Belt Section Dimensions

V-Belts · Classical V-belts (ISO 4184 / DIN 2215)

The A V-belt section is 13 mm (0.512 in) wide at the top and 8 mm (0.315 in) high, with a 40° included angle. The section must match the pulley groove; the belt length is ordered separately.

bTop width
13 mm0.512 in0.512 in13 mm
hHeight
8 mm0.315 in0.315 in8 mm
bdDatum (pitch) width
11 mm0.433 in0.433 in11 mm

Drawing

b 13 mmb 0.512 inh 8 mmh 0.315 inbd 11 mmbd 0.433 indatum line40°
Drawn to scale · Dimensions in mmDimensions in inches

A specifications

bTop width13 mm0.512 in
hHeight8 mm0.315 in
bdDatum (pitch) width11 mm0.433 in
Height / width0.62
Belt angle40°
Pulley groove angle34° / 38°

The A section (13 × 8 mm, about 1/2 × 5/16 in) is the most common classical V-belt. Inch catalogues name it by inside length, e.g. A48. The light-duty 4L belt has nearly the same section but lighter construction. Use an A belt where a 4L belt keeps failing on a heavier drive.

Similar section in the other system (check the pulley groove)

All V-belt sections

Compare all 16 sections in the V-Belts chart →

Sources

  1. ISO 4184:1992, Belt drives: Classical and narrow V-belts, Lengths in datum system
  2. DIN 7753-1: Endless narrow V-belts for machine construction (SPZ, SPA, SPB, SPC)
  3. DIN 2215: Endless classical V-belts
  4. RMA/MPTA IP-22: Narrow multiple V-belts (3V, 5V, 8V); IP-23: Light duty (FHP) V-belts
  5. Gates: Heavy duty V-belt drive design manual

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.