Z V-Belt Section Dimensions

V-Belts · Classical V-belts (ISO 4184 / DIN 2215)

The Z V-belt section is 10 mm (0.394 in) wide at the top and 6 mm (0.236 in) high, with a 40° included angle. The section must match the pulley groove; the belt length is ordered separately.

bTop width
10 mm0.394 in0.394 in10 mm
hHeight
6 mm0.236 in0.236 in6 mm
bdDatum (pitch) width
8.5 mm0.335 in0.335 in8.5 mm

Drawing

b 10 mmb 0.394 inh 6 mmh 0.236 inbd 8.5 mmbd 0.335 indatum line40°
Drawn to scale · Dimensions in mmDimensions in inches

Z specifications

bTop width10 mm0.394 in
hHeight6 mm0.236 in
bdDatum (pitch) width8.5 mm0.335 in
Height / width0.60
Belt angle40°
Pulley groove angle34° / 38°

Similar section in the other system (check the pulley groove)

All V-belt sections

Compare all 16 sections in the V-Belts chart →

Sources

  1. ISO 4184:1992, Belt drives: Classical and narrow V-belts, Lengths in datum system
  2. DIN 7753-1: Endless narrow V-belts for machine construction (SPZ, SPA, SPB, SPC)
  3. DIN 2215: Endless classical V-belts
  4. RMA/MPTA IP-22: Narrow multiple V-belts (3V, 5V, 8V); IP-23: Light duty (FHP) V-belts
  5. Gates: Heavy duty V-belt drive design manual

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.