VESA 100 × 200 mm Mount: Screw Size and Specs

VESA Mount Patterns · Large monitors and small TVs (MIS-E)

VESA 100 × 200 mm has four mounting holes 100 mm apart horizontally and 200 mm vertically, centre to centre (100 mm (3.94 in) × 200 mm (7.87 in)). It belongs to the MIS-E (rotated) class and uses M4 screws. Typical screens: 24–37 in screens (few models).

aHorizontal spacing
100 mm3.94 in3.94 in100 mm
bVertical spacing
200 mm7.87 in7.87 in200 mm
Screw thread
M4
VESA class
MIS-E (rotated)

Drawing

100 mm3.94 in200 mm7.87 in4 × M4
Hole centres to scale. The outer frame only marks the area around the pattern.Drawn to scale · Dimensions in mmDimensions in inches

100 × 200 mm specifications

aHorizontal spacing100 mm3.94 in
bVertical spacing200 mm7.87 in
VESA classMIS-E (rotated)
Screw threadM4
Typical screens24–37 in screens (few models)

This is 200 × 100 turned 90°: 100 mm horizontal and 200 mm vertical. A mount for 200 × 100 fits only if its plate can be rotated or has slotted holes in both directions.

Patterns with the same horizontal or vertical spacing

All VESA Mount Patterns sizes

Compare all 17 sizes in the VESA Mount Patterns chart →

Sources

  1. VESA: Flat Display Mounting Interface Standard (FDMI), Version 1, Rev. 1
  2. Ergotron: VESA standard: hole patterns, screw sizes and weight classes
  3. GCX: VESA mounts: what you need to know
  4. Abt: VESA standard guide (MIS-B to MIS-F, screw sizes, weight limits)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.