VESA 100 × 100 mm Mount: Screw Size and Specs

VESA Mount Patterns · Monitors (MIS-D)

VESA 100 × 100 mm has four mounting holes 100 mm apart horizontally and 100 mm vertically, centre to centre (100 mm (3.94 in) × 100 mm (3.94 in)). It belongs to the MIS-D class and uses M4 screws. Typical screens: 19–32 in monitors, small TVs.

aHorizontal spacing
100 mm3.94 in3.94 in100 mm
bVertical spacing
100 mm3.94 in3.94 in100 mm
Screw thread
M4
VESA class
MIS-D

Drawing

100 mm3.94 in100 mm3.94 in4 × M4
Hole centres to scale. The outer frame only marks the area around the pattern.Drawn to scale · Dimensions in mmDimensions in inches

100 × 100 mm specifications

aHorizontal spacing100 mm3.94 in
bVertical spacing100 mm3.94 in
VESA classMIS-D
Screw threadM4
Class weight limit14 kg30.86 lb
Typical screens19–32 in monitors, small TVs

The most common monitor pattern and the one most monitor arms are built around. M4 screws, display weight up to 14 kg (30.8 lb) in the MIS-D class. Many monitor arms are rated for less, so check the arm's own limit.

Patterns with the same horizontal or vertical spacing

All VESA Mount Patterns sizes

Compare all 17 sizes in the VESA Mount Patterns chart →

Sources

  1. VESA: Flat Display Mounting Interface Standard (FDMI), Version 1, Rev. 1
  2. Ergotron: VESA standard: hole patterns, screw sizes and weight classes
  3. GCX: VESA mounts: what you need to know
  4. Abt: VESA standard guide (MIS-B to MIS-F, screw sizes, weight limits)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.