VESA Mount Sizes: Hole Patterns and Screw Sizes
A VESA pattern is the spacing of the four threaded mounting holes on the back of a monitor or TV, horizontal × vertical, centre to centre, in millimetres. A mount fits if it supports your pattern and your screen's weight. Monitors almost always use 75 × 75 or 100 × 100 with M4 screws; TVs use larger patterns with M6 or M8 screws.
Size chartTap a size for its drawing and full specs
| Pattern | aHorizontal spacingmmin | bVertical spacingmmin | VESA class | Screw thread | Class weight limitkglb | Typical screens |
|---|---|---|---|---|---|---|
| Small displays (MIS-B, MIS-C) | ||||||
| 50 × 20 mm | 501.97 | 200.79 | MIS-B | M4 | 24.41 | 4–7.9 in |
| 75 × 35 mm | 752.95 | 351.38 | MIS-C | M4 | 4.59.92 | 8–11.9 in |
| Monitors (MIS-D) | ||||||
| 75 × 75 mm | 752.95 | 752.95 | MIS-D | M4 | 1430.86 | 17–24 in monitors |
| 100 × 100 mm | 1003.94 | 1003.94 | MIS-D | M4 | 1430.86 | 19–32 in monitors, small TVs |
| Large monitors and small TVs (MIS-E) | ||||||
| 200 × 100 mm | 2007.87 | 1003.94 | MIS-E | M4 | 22.750.04 | 24–37 in monitors and TVs |
| 100 × 200 mm | 1003.94 | 2007.87 | MIS-E (rotated) | M4 | — | 24–37 in screens (few models) |
| TVs and large displays (MIS-F) | ||||||
| 200 × 200 mm | 2007.87 | 2007.87 | MIS-F | M6 typical | 113.6250.45 | 32–43 in TVs |
| 300 × 200 mm | 30011.81 | 2007.87 | MIS-F | M6 typical | 113.6250.45 | 40–50 in TVs |
| 300 × 300 mm | 30011.81 | 30011.81 | MIS-F | M6 typical | 113.6250.45 | 43–55 in TVs |
| 400 × 200 mm | 40015.75 | 2007.87 | MIS-F | M6 typical | 113.6250.45 | 40–55 in TVs |
| 400 × 300 mm | 40015.75 | 30011.81 | MIS-F | M6 or M8 | 113.6250.45 | 50–65 in TVs |
| 400 × 400 mm | 40015.75 | 40015.75 | MIS-F | M6 or M8 | 113.6250.45 | 55–75 in TVs |
| 600 × 300 mm | 60023.62 | 30011.81 | MIS-F | M8 typical | 113.6250.45 | 65–75 in TVs |
| 600 × 400 mm | 60023.62 | 40015.75 | MIS-F | M8 typical | 113.6250.45 | 65–85 in TVs |
| 600 × 600 mm | 60023.62 | 60023.62 | MIS-F | M8 typical | 113.6250.45 | 75–86 in TVs and displays |
| 800 × 400 mm | 80031.50 | 40015.75 | MIS-F | M8 typical | 113.6250.45 | 75–98 in TVs |
| 800 × 600 mm | 80031.50 | 60023.62 | MIS-F | M8 typical | 113.6250.45 | 85–100 in TVs and displays |
No exact match. The nearest sizes:
How to measure your VESA pattern
Measure from the centre of one hole to the centre of the next, first horizontally, then vertically. Write it width × height: a TV with holes 400 mm apart side to side and 300 mm top to bottom is VESA 400 × 300. If the holes are hard to reach, measuring edge to edge on the same side of two holes gives the same result. The pattern is always a round metric number; if you get 395 mm, it is 400.
To find the screw size, try an M4 screw first (monitors and small TVs), then M6, then M8. Most TV makers print the screw size and the maximum screw depth in the manual. Never force a long screw: the thread inserts in a display are shallow, and a screw that bottoms out can crack the panel or pull the insert out. Use the spacers that come with the mount when the back is curved or has a recessed hole.
The VESA class (MIS-D, MIS-E, MIS-F) groups patterns with a screw size and a maximum display weight. The class limit is the most the interface itself is designed for; your actual limit is the lowest of the display's rating, the mount's rating and the wall fixing.
About VESA Mount Patterns
VESA's Flat Display Mounting Interface standard (FDMI, earlier called MIS) defines where the holes go so that any compliant mount fits any compliant screen. The common monitor patterns, 75 × 75 and 100 × 100 mm, use M4 screws and are rated for displays up to 14 kg (30.8 lb). Most monitor arms and stands have both patterns on the same plate.
For TVs the standard's large-screen class, MIS-F, allows patterns in 200 mm steps with M6 or M8 screws and displays up to 113.6 kg (250 lb). In practice TV makers also use rectangular patterns such as 300 × 200, 400 × 300 and 600 × 400 that are not in the strict square series, which is why TV mounts are sold by their largest supported pattern ("up to 600 × 400") with adjustable arms that cover everything smaller.
The pattern is not tied to the screen size. Two 65-inch TVs from different makers can use 300 × 300 and 400 × 400, and a light 55-inch model may use a smaller pattern than a heavy 50-inch one. The "typical screens" column shows where each pattern is usually found; always confirm on the back of your screen or in its manual.
Monitors without VESA holes
Some thin monitors and all-in-one computers have no VESA holes or hide them under the stand. Makers often sell a VESA adapter plate, and third-party clamp brackets exist for screens with no holes at all. Check the weight: clamp adapters are usually rated for light screens only.
Choosing a wall mount
A wall mount needs three things to match: the hole pattern (the mount's arms must reach your pattern), the weight rating (screen weight without the stand), and the wall (wood studs, concrete or masonry each need different fixings). Tilting and full-motion mounts put more leverage on the wall fixing than a flat mount, so stay well inside the rated weight with long arms.
Questions
What screws do I need for VESA 100 × 100?
M4 machine screws, usually 10 to 12 mm long without spacers. Check the usable thread depth in the monitor first: a screw that bottoms out can damage the display. The same applies to 75 × 75 and 200 × 100.
What size screws fit a TV wall mount?
M4 for small TVs with 100 × 100 or 200 × 100 patterns, M6 for most 200 × 200 to 400 × 400 patterns, and M8 for many large TVs with 400 × 400 and bigger patterns. The TV manual states the size and maximum depth.
How do I measure the VESA pattern on my TV?
Measure horizontally between the centres of two holes, then vertically, in millimetres. 400 mm across and 300 mm down is VESA 400 × 300. The numbers are always round (200, 300, 400, 600), so round to the nearest standard value.
Will a 100 × 100 mount fit a 75 × 75 monitor?
Usually yes: most monitor mount plates have both 75 and 100 mm hole sets. If yours has only 100 × 100 holes, a small adapter plate converts it.
How much weight can a VESA mount hold?
The VESA classes allow up to 14 kg (30.8 lb) for 75 and 100 mm patterns, about 23 kg (50 lb) for 200 × 100, and up to 113.6 kg (250 lb) for large MIS-F patterns. The real limit is the mount's own rating and the wall fixing, which are often lower.
Is VESA 400 × 400 the same as 400 × 300?
No. The first number is horizontal, the second vertical: 400 × 400 has holes 400 mm apart both ways, 400 × 300 is 100 mm shorter vertically. A mount listed "up to 400 × 400" with sliding arms fits both.
Sources
- VESA: Flat Display Mounting Interface Standard (FDMI), Version 1, Rev. 1
- Ergotron: VESA standard: hole patterns, screw sizes and weight classes
- GCX: VESA mounts: what you need to know
- Abt: VESA standard guide (MIS-B to MIS-F, screw sizes, weight limits)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.