VESA 75 × 75 mm Mount: Screw Size and Specs

VESA Mount Patterns · Monitors (MIS-D)

VESA 75 × 75 mm has four mounting holes 75 mm apart horizontally and 75 mm vertically, centre to centre (75 mm (2.95 in) × 75 mm (2.95 in)). It belongs to the MIS-D class and uses M4 screws. Typical screens: 17–24 in monitors.

aHorizontal spacing
75 mm2.95 in2.95 in75 mm
bVertical spacing
75 mm2.95 in2.95 in75 mm
Screw thread
M4
VESA class
MIS-D

Drawing

75 mm2.95 in75 mm2.95 in4 × M4
Hole centres to scale. The outer frame only marks the area around the pattern.Drawn to scale · Dimensions in mmDimensions in inches

75 × 75 mm specifications

aHorizontal spacing75 mm2.95 in
bVertical spacing75 mm2.95 in
VESA classMIS-D
Screw threadM4
Class weight limit14 kg30.86 lb
Typical screens17–24 in monitors

75 × 75 is the smallest common monitor pattern. Most monitor arm plates have both 75 × 75 and 100 × 100 hole sets, so a 75 mm monitor fits nearly every arm. Screws are M4.

Patterns with the same horizontal or vertical spacing

All VESA Mount Patterns sizes

Compare all 17 sizes in the VESA Mount Patterns chart →

Sources

  1. VESA: Flat Display Mounting Interface Standard (FDMI), Version 1, Rev. 1
  2. Ergotron: VESA standard: hole patterns, screw sizes and weight classes
  3. GCX: VESA mounts: what you need to know
  4. Abt: VESA standard guide (MIS-B to MIS-F, screw sizes, weight limits)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.