W14×808 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×808 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 22.8 in (579.1 mm) deep with a 18.6 in (472.4 mm) flange, a 3.74 in (95.0 mm) web and a 5.12 in (130.0 mm) flange, and weighs 808 lb/ft (1202.4 kg/m). Area 238 in² (153,548 mm²); strong-axis Ix = 15,900 in⁴ (661,808 cm⁴), Sx = 1,390 in³ (22,778 cm³), Zx = 1,830 in³ (29,988.3 cm³).
- dDepth
- 579.1 mm22.8 in22.8 in579.1 mm
- bfFlange width
- 472.4 mm18.6 in18.6 in472.4 mm
- twWeb thickness
- 95.0 mm3.74 in3.74 in95.0 mm
- tfFlange thickness
- 130.0 mm5.12 in5.12 in130.0 mm
Drawing
W14×808 specifications
| dDepth | 22.8 in579.1 mm |
|---|---|
| bfFlange width | 18.6 in472.4 mm |
| twWeb thickness | 3.74 in95.0 mm |
| tfFlange thickness | 5.12 in130.0 mm |
| kDesign value | 5.71 in145.0 mm |
| kDetailing value | 5 3/4 in146.0 mm |
| k1Detailing value | 2 1/2 in63.5 mm |
| WWeight | 808 lb/ft1202.4 kg/m |
| AArea | 238 in²153,548 mm² |
| IxMoment of inertia, strong axis | 15,900 in⁴661,808 cm⁴ |
| ZxPlastic modulus, strong axis | 1,830 in³29,988.3 cm³ |
| SxSection modulus, strong axis | 1,390 in³22,778 cm³ |
| rxRadius of gyration, strong axis | 8.17 in207.5 mm |
| IyMoment of inertia, weak axis | 5,550 in⁴231,008.4 cm⁴ |
| ZyPlastic modulus, weak axis | 930 in³15,240 cm³ |
| SySection modulus, weak axis | 597 in³9,783.1 cm³ |
| ryRadius of gyration, weak axis | 4.83 in122.7 mm |
| JTorsional constant | 1,840 in⁴76,586.58 cm⁴ |
| bf/2tfFlange slenderness | 1.82 |
| h/twWeb slenderness | 3 |
| Metric designation | W360×1202 |
Also known as
W360×1202
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.