W14×873 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×873 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 23.6 in (599.4 mm) deep with a 18.8 in (477.5 mm) flange, a 3.94 in (100.1 mm) web and a 5.51 in (140.0 mm) flange, and weighs 873 lb/ft (1299.2 kg/m). Area 257 in² (165,806 mm²); strong-axis Ix = 18,100 in⁴ (753,378.9 cm⁴), Sx = 1,530 in³ (25,072.2 cm³), Zx = 2,030 in³ (33,265.7 cm³).

dDepth
599.4 mm23.6 in23.6 in599.4 mm
bfFlange width
477.5 mm18.8 in18.8 in477.5 mm
twWeb thickness
100.1 mm3.94 in3.94 in100.1 mm
tfFlange thickness
140.0 mm5.51 in5.51 in140.0 mm

Drawing

477.5 mm18.8 in599.4 mm23.6 intf 140.0 mmtf 5.51 intw 100.1 mmtw 3.94 ink 154.9 mmk 6.1 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×873 specifications

dDepth23.6 in599.4 mm
bfFlange width18.8 in477.5 mm
twWeb thickness3.94 in100.1 mm
tfFlange thickness5.51 in140.0 mm
kDesign value6.1 in154.9 mm
kDetailing value6 3/16 in157.2 mm
k1Detailing value2 9/16 in65.1 mm
WWeight873 lb/ft1299.2 kg/m
AArea257 in²165,806 mm²
IxMoment of inertia, strong axis18,100 in⁴753,378.9 cm⁴
ZxPlastic modulus, strong axis2,030 in³33,265.7 cm³
SxSection modulus, strong axis1,530 in³25,072.2 cm³
rxRadius of gyration, strong axis8.39 in213.1 mm
IyMoment of inertia, weak axis6,170 in⁴256,814.8 cm⁴
ZyPlastic modulus, weak axis1,020 in³16,714.8 cm³
SySection modulus, weak axis656 in³10,749.9 cm³
ryRadius of gyration, weak axis4.9 in124.5 mm
JTorsional constant2,270 in⁴94,484.53 cm⁴
bf/2tfFlange slenderness1.71
h/twWeb slenderness2.9
Metric designationW360×1299

Also known as

W360×1299

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.