W36×723 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×723 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 41.8 in (1061.7 mm) deep with a 17.8 in (452.1 mm) flange, a 2.17 in (55.1 mm) web and a 3.9 in (99.1 mm) flange, and weighs 723 lb/ft (1075.9 kg/m). Area 213 in² (137,419 mm²); strong-axis Ix = 57,300 in⁴ (2,385,006.1 cm⁴), Sx = 2,740 in³ (44,900.6 cm³), Zx = 3,270 in³ (53,585.7 cm³).

dDepth
1061.7 mm41.8 in41.8 in1061.7 mm
bfFlange width
452.1 mm17.8 in17.8 in452.1 mm
twWeb thickness
55.1 mm2.17 in2.17 in55.1 mm
tfFlange thickness
99.1 mm3.9 in3.9 in99.1 mm

Drawing

452.1 mm17.8 in1061.7 mm41.8 intf 99.1 mmtf 3.9 intw 55.1 mmtw 2.17 ink 118.1 mmk 4.65 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×723 specifications

dDepth41.8 in1061.7 mm
bfFlange width17.8 in452.1 mm
twWeb thickness2.17 in55.1 mm
tfFlange thickness3.9 in99.1 mm
kDesign value4.65 in118.1 mm
kDetailing value4 11/16 in119.1 mm
k1Detailing value1 7/8 in47.6 mm
WWeight723 lb/ft1075.9 kg/m
AArea213 in²137,419 mm²
IxMoment of inertia, strong axis57,300 in⁴2,385,006.1 cm⁴
ZxPlastic modulus, strong axis3,270 in³53,585.7 cm³
SxSection modulus, strong axis2,740 in³44,900.6 cm³
rxRadius of gyration, strong axis16.4 in416.6 mm
IyMoment of inertia, weak axis3,700 in⁴154,005.6 cm⁴
ZyPlastic modulus, weak axis658 in³10,782.7 cm³
SySection modulus, weak axis416 in³6,817 cm³
ryRadius of gyration, weak axis4.17 in105.9 mm
JTorsional constant785 in⁴32,674.17 cm⁴
bf/2tfFlange slenderness2.28
h/twWeb slenderness15
Metric designationW920×1077

Also known as

W920×1077

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.