W36×652 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×652 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 41.1 in (1043.9 mm) deep with a 17.6 in (447.0 mm) flange, a 1.97 in (50.0 mm) web and a 3.54 in (89.9 mm) flange, and weighs 652 lb/ft (970.3 kg/m). Area 192 in² (123,871 mm²); strong-axis Ix = 50,600 in⁴ (2,106,131 cm⁴), Sx = 2,460 in³ (40,312.2 cm³), Zx = 2,910 in³ (47,686.4 cm³).

dDepth
1043.9 mm41.1 in41.1 in1043.9 mm
bfFlange width
447.0 mm17.6 in17.6 in447.0 mm
twWeb thickness
50.0 mm1.97 in1.97 in50.0 mm
tfFlange thickness
89.9 mm3.54 in3.54 in89.9 mm

Drawing

447.0 mm17.6 in1043.9 mm41.1 intf 89.9 mmtf 3.54 intw 50.0 mmtw 1.97 ink 114.0 mmk 4.49 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×652 specifications

dDepth41.1 in1043.9 mm
bfFlange width17.6 in447.0 mm
twWeb thickness1.97 in50.0 mm
tfFlange thickness3.54 in89.9 mm
kDesign value4.49 in114.0 mm
kDetailing value4 13/16 in122.2 mm
k1Detailing value2 3/16 in55.6 mm
WWeight652 lb/ft970.3 kg/m
AArea192 in²123,871 mm²
IxMoment of inertia, strong axis50,600 in⁴2,106,131 cm⁴
ZxPlastic modulus, strong axis2,910 in³47,686.4 cm³
SxSection modulus, strong axis2,460 in³40,312.2 cm³
rxRadius of gyration, strong axis16.2 in411.5 mm
IyMoment of inertia, weak axis3,230 in⁴134,442.8 cm⁴
ZyPlastic modulus, weak axis581 in³9,520.9 cm³
SySection modulus, weak axis367 in³6,014.1 cm³
ryRadius of gyration, weak axis4.1 in104.1 mm
JTorsional constant593 in⁴24,682.52 cm⁴
bf/2tfFlange slenderness2.48
h/twWeb slenderness16.3
Metric designationW920×970

Also known as

W920×970

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.