M1.6 Washer Size: Inside and Outside Diameter

Flat Washers

An M1.6 flat washer (ISO 7089 / DIN 125) has a 1.7 mm (0.067 in) hole, a 4 mm (0.157 in) outside diameter and is 0.3 mm (0.012 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
1.7 mm0.067 in0.067 in1.7 mm
d₂Outside diameter
4 mm0.157 in0.157 in4 mm
hThickness
0.3 mm0.012 in0.012 in0.3 mm

Drawing

⌀1.7 mm⌀0.067 in⌀4 mm⌀0.157 in
h 0.3 mmh 0.012 in⌀4 mm⌀0.157 in⌀1.7 mm⌀0.067 in
Drawn to scale · Dimensions in mmDimensions in inches

M1.6 specifications

d₁Inside diameter1.7 mm0.067 in
d₂Outside diameter4 mm0.157 in
hThickness0.3 mm0.012 in

M1.6, M2 and M2.5 washers have no ISO 7093 large-series version.

M1.6 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.