M30 Washer Size: Inside and Outside Diameter

Flat Washers

An M30 flat washer (ISO 7089 / DIN 125) has a 31 mm (1.220 in) hole, a 56 mm (2.205 in) outside diameter and is 4 mm (0.157 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
31 mm1.220 in1.220 in31 mm
d₂Outside diameter
56 mm2.205 in2.205 in56 mm
hThickness
4 mm0.157 in0.157 in4 mm

Drawing

⌀31 mm⌀1.220 in⌀56 mm⌀2.205 in
h 4 mmh 0.157 in⌀56 mm⌀2.205 in⌀31 mm⌀1.220 in
Drawn to scale · Dimensions in mmDimensions in inches

M30 specifications

d₁Inside diameter31 mm1.220 in
d₂Outside diameter56 mm2.205 in
hThickness4 mm0.157 in
Outside diameter, large (ISO 7093)92 mm3.622 in
Thickness, large (ISO 7093)6 mm0.236 in

M30 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.