M30 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M30 is a metric thread with a major diameter of 30 mm (1.181 in) and a coarse pitch of 3.5 mm (7.3 TPI). Drill 26.5 mm (1.043 in) before tapping the coarse thread; the common fine thread is M30 × 2 mm, tapped with a 28 mm drill. For a bolt to pass through, drill a 33 mm (1.299 in) clearance hole (ISO 273 medium).

PCoarse pitch
3.5 mm7.3 TPI7.3 TPI3.5 mm
Tap drill, coarse
26.5 mm1.043 in1.043 in26.5 mm
Clearance hole, medium
33 mm1.299 in1.299 in33 mm
d₃Minor diameter, bolt
25.706 mm1.0120 in1.0120 in25.706 mm

Drawing

⌀30 mm⌀1.181 in⌀25.706 mm⌀1.0120 inP 3.5 mmP 7.3 TPI
P 3.5 mmP 7.3 TPI1.894 mm0.0746 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M30 specifications

dMajor diameter30 mm1.181 in
PCoarse pitch3.5 mm7.3 TPI
Fine pitch (common)2 mm12.7 TPI
Fine pitches (ISO 261)3 · 2 · 1.5 · 1
Tap drill, coarse26.5 mm1.043 in
Tap drill, fine28 mm1.102 in
d₂Pitch diameter27.727 mm1.0916 in
D₁Minor diameter, nut26.211 mm1.0319 in
d₃Minor diameter, bolt25.706 mm1.0120 in
Clearance hole, fine31 mm1.220 in
Clearance hole, medium33 mm1.299 in
Clearance hole, coarse35 mm1.378 in
ISO 261 size choice1st choice (preferred)

Also known as

M30x3.5M30x2

M30 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.