M42 Washer Size: Inside and Outside Diameter

Flat Washers

An M42 flat washer (ISO 7089 / DIN 125) has a 45 mm (1.772 in) hole, a 78 mm (3.071 in) outside diameter and is 8 mm (0.315 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
45 mm1.772 in1.772 in45 mm
d₂Outside diameter
78 mm3.071 in3.071 in78 mm
hThickness
8 mm0.315 in0.315 in8 mm

Drawing

⌀45 mm⌀1.772 in⌀78 mm⌀3.071 in
h 8 mmh 0.315 in⌀78 mm⌀3.071 in⌀45 mm⌀1.772 in
Drawn to scale · Dimensions in mmDimensions in inches

M42 specifications

d₁Inside diameter45 mm1.772 in
d₂Outside diameter78 mm3.071 in
hThickness8 mm0.315 in

Above M36 ISO 7089 and DIN 125 differ: the ISO M42 washer has a 45 mm bore, DIN 125 tables give 43 mm. The outside diameter (78 mm) is the same.

M42 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.