M42 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M42 is a metric thread with a major diameter of 42 mm (1.654 in) and a coarse pitch of 4.5 mm (5.6 TPI). Drill 37.5 mm (1.476 in) before tapping the coarse thread; the common fine thread is M42 × 3 mm, tapped with a 39 mm drill. For a bolt to pass through, drill a 45 mm (1.772 in) clearance hole (ISO 273 medium).

PCoarse pitch
4.5 mm5.6 TPI5.6 TPI4.5 mm
Tap drill, coarse
37.5 mm1.476 in1.476 in37.5 mm
Clearance hole, medium
45 mm1.772 in1.772 in45 mm
d₃Minor diameter, bolt
36.479 mm1.4362 in1.4362 in36.479 mm

Drawing

⌀42 mm⌀1.654 in⌀36.479 mm⌀1.4362 inP 4.5 mmP 5.6 TPI
P 4.5 mmP 5.6 TPI2.436 mm0.0959 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M42 specifications

dMajor diameter42 mm1.654 in
PCoarse pitch4.5 mm5.6 TPI
Fine pitch (common)3 mm8.5 TPI
Fine pitches (ISO 261)4 · 3 · 2 · 1.5
Tap drill, coarse37.5 mm1.476 in
Tap drill, fine39 mm1.535 in
d₂Pitch diameter39.077 mm1.5385 in
D₁Minor diameter, nut37.129 mm1.4618 in
d₃Minor diameter, bolt36.479 mm1.4362 in
Clearance hole, fine43 mm1.693 in
Clearance hole, medium45 mm1.772 in
Clearance hole, coarse48 mm1.890 in
ISO 261 size choice1st choice (preferred)

Also known as

M42x4.5M42x3

M42 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.