1/2″ Wrench / Socket Size: Equivalent and Bolt Size

Wrench & Socket Sizes · SAE (inch) sizes

A 1/2″ wrench or socket fits a hex 1/2 in (12.7 mm) across the flats. The nearest size in the other system is 13 mm = 0.512″, a difference of 0.012 in (0.30 mm): No substitute.

sSize (across flats)
12.7 mm1/2 in1/2 in12.7 mm

Drawing

s 12.7 mms 1/2 in
Proportions shown, not to scale · Dimensions in mmDimensions in inches

1/2″ specifications

sSize (across flats)12.7 mm1/2 in
Nearest size in the other system13 mm = 0.512″
Difference (other − this)0.30 mm0.012 in
Can they be swapped?No substitute
Bolts and nuts that use it5/16″ hex cap screw & nut; 1/4″ heavy hex nut

1/2″ = 12.70 mm, the size for 5/16″ hex cap screws and nuts. The nearest metric size, 13 mm, is 0.30 mm larger. It will do on a loose 1/2″ head in an emergency, never on a tight one. Note that "1/2-inch" also names the 1/2″ square drive.

Nearest sizes in the other system

Bolts and nuts that take a 1/2″ wrench

All Wrench & Socket Sizes sizes

Compare all 72 sizes in the Wrench & Socket Sizes chart →

Sources

  1. ISO 272:1982, Fasteners, hexagon products, widths across flats
  2. ISO 4014 / ISO 4032: Hexagon head bolts and regular nuts (metric head widths)
  3. ASME B18.2.1: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch)
  4. ASME B18.2.2: Nuts for general applications: machine screw nuts, hex, square, hex flange and coupling nuts (inch)
  5. Portland Bolt: Wrench openings and socket sizing (FAQ)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.