Wrench and Socket Size Chart: Metric vs SAE
Every common metric and SAE wrench or socket size with its nearest counterpart in the other system and the exact gap. Only a few pairs truly interchange (19 mm = 3/4″, 27 mm = 1-1/16″, 8 mm ≈ 5/16″), while the often-swapped 13 mm and 1/2″ differ by 0.3 mm.
Size chartTap a size for its drawing and full specs
| Size | sSize (across flats)mminmm · in | Nearest size in the other system | Difference (other − this)mminmm · in | Can they be swapped? | Bolts and nuts that use it |
|---|---|---|---|---|---|
| Metric sizes | |||||
| 4 mm | 40.157 | 5/32″ = 3.97 mm | −0.03−0.001 | Interchangeable | M2 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 5 mm | 50.197 | 3/16″ = 4.76 mm | −0.24−0.009 | Other size is slightly smaller: will not fit; this size is loose on it | M2.5 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 5.5 mm | 5.50.217 | 7/32″ = 5.56 mm | 0.060.002 | Interchangeable | M3 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 6 mm | 60.236 | 1/4″ = 6.35 mm | 0.350.014 | No substitute | M3.5 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 7 mm | 70.276 | 9/32″ = 7.14 mm | 0.140.006 | Other size is slightly larger: fits loosely, light use only | M4 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 8 mm | 80.315 | 5/16″ = 7.94 mm | −0.06−0.002 | Interchangeable | M5 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 9 mm | 90.354 | 11/32″ = 8.73 mm | −0.27−0.011 | No substitute | — |
| 10 mm | 100.394 | 3/8″ = 9.53 mm | −0.47−0.019 | No substitute | M6 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 11 mm | 110.433 | 7/16″ = 11.11 mm | 0.110.004 | Other size is slightly larger: fits loosely, light use only | M7 hex nut (DIN 934) |
| 12 mm | 120.472 | 1/2″ = 12.70 mm | 0.700.028 | No substitute | — |
| 13 mm | 130.512 | 1/2″ = 12.70 mm | −0.30−0.012 | No substitute | M8 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 14 mm | 140.551 | 9/16″ = 14.29 mm | 0.290.011 | No substitute | — |
| 15 mm | 150.591 | 19/32″ = 15.08 mm | 0.080.003 | Interchangeable | — |
| 16 mm | 160.630 | 5/8″ = 15.88 mm | −0.12−0.005 | Other size is slightly smaller: will not fit; this size is loose on it | M10 hex bolt & nut (ISO 4014/4017/4032) |
| 17 mm | 170.669 | 11/16″ = 17.46 mm | 0.460.018 | No substitute | M10 hex bolt & nut (DIN 931/933/934) |
| 18 mm | 180.709 | 11/16″ = 17.46 mm | −0.54−0.021 | No substitute | M12 hex bolt & nut (ISO 4014/4017/4032) |
| 19 mm | 190.748 | 3/4″ = 19.05 mm | 0.050.002 | Interchangeable | M12 hex bolt & nut (DIN 931/933/934) |
| 20 mm | 200.787 | 13/16″ = 20.64 mm | 0.640.025 | No substitute | — |
| 21 mm | 210.827 | 13/16″ = 20.64 mm | −0.36−0.014 | No substitute | M14 hex bolt & nut (ISO 4014/4017/4032) |
| 22 mm | 220.866 | 7/8″ = 22.23 mm | 0.230.009 | Other size is slightly larger: fits loosely, light use only | M14 hex bolt & nut (DIN 931/933/934) |
| 23 mm | 230.906 | 7/8″ = 22.23 mm | −0.77−0.030 | No substitute | — |
| 24 mm | 240.945 | 15/16″ = 23.81 mm | −0.19−0.007 | Other size is slightly smaller: will not fit; this size is loose on it | M16 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 25 mm | 250.984 | 1″ = 25.40 mm | 0.400.016 | No substitute | — |
| 26 mm | 261.024 | 1″ = 25.40 mm | −0.60−0.024 | No substitute | — |
| 27 mm | 271.063 | 1-1/16″ = 26.99 mm | −0.010.000 | Interchangeable | M18 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 28 mm | 281.102 | 1-1/8″ = 28.57 mm | 0.570.022 | No substitute | — |
| 29 mm | 291.142 | 1-1/8″ = 28.57 mm | −0.43−0.017 | No substitute | — |
| 30 mm | 301.181 | 1-3/16″ = 30.16 mm | 0.160.006 | Other size is slightly larger: fits loosely, light use only | M20 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 31 mm | 311.220 | 1-1/4″ = 31.75 mm | 0.750.030 | No substitute | — |
| 32 mm | 321.260 | 1-1/4″ = 31.75 mm | −0.25−0.010 | Other size is slightly smaller: will not fit; this size is loose on it | M22 hex bolt & nut (DIN 931/933/934) |
| 33 mm | 331.299 | 1-5/16″ = 33.34 mm | 0.340.013 | No substitute | — |
| 34 mm | 341.339 | 1-5/16″ = 33.34 mm | −0.66−0.026 | No substitute | M22 hex bolt & nut (ISO 4014/4017/4032) |
| 35 mm | 351.378 | 1-3/8″ = 34.92 mm | −0.08−0.003 | Interchangeable | — |
| 36 mm | 361.417 | 1-7/16″ = 36.51 mm | 0.510.020 | No substitute | M24 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 38 mm | 381.496 | 1-1/2″ = 38.10 mm | 0.100.004 | Interchangeable | — |
| 41 mm | 411.614 | 1-5/8″ = 41.27 mm | 0.270.011 | No substitute | M27 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 46 mm | 461.811 | 1-13/16″ = 46.04 mm | 0.040.002 | Interchangeable | M30 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| 50 mm | 501.969 | 2″ = 50.80 mm | 0.800.031 | No substitute | M33 hex bolt & nut (ISO 4014/4032, DIN 933/934) |
| SAE (inch) sizes | |||||
| 5/32″ | 3.975/32 | 4 mm = 0.157″ | 0.030.001 | Interchangeable | #0 machine screw nut; #1 machine screw nut |
| 3/16″ | 4.763/16 | 5 mm = 0.197″ | 0.240.009 | Other size is slightly larger: fits loosely, light use only | #2 machine screw nut; #3 machine screw nut |
| 7/32″ | 5.567/32 | 5.5 mm = 0.217″ | −0.06−0.002 | Interchangeable | — |
| 1/4″ | 6.351/4 | 6 mm = 0.236″ | −0.35−0.014 | No substitute | #4 machine screw nut |
| 9/32″ | 7.149/32 | 7 mm = 0.276″ | −0.14−0.006 | Other size is slightly smaller: will not fit; this size is loose on it | — |
| 5/16″ | 7.945/16 | 8 mm = 0.315″ | 0.060.002 | Interchangeable | #5 machine screw nut; #6 machine screw nut |
| 11/32″ | 8.7311/32 | 9 mm = 0.354″ | 0.270.011 | No substitute | #8 machine screw nut |
| 3/8″ | 9.533/8 | 10 mm = 0.394″ | 0.470.019 | No substitute | #10 machine screw nut |
| 7/16″ | 11.117/16 | 11 mm = 0.433″ | −0.11−0.004 | Other size is slightly smaller: will not fit; this size is loose on it | #12 machine screw nut; 1/4″ hex cap screw & nut |
| 1/2″ | 12.71/2 | 13 mm = 0.512″ | 0.300.012 | No substitute | 5/16″ hex cap screw & nut; 1/4″ heavy hex nut |
| 9/16″ | 14.299/16 | 14 mm = 0.551″ | −0.29−0.011 | No substitute | 3/8″ hex cap screw & nut; 5/16″ heavy hex nut |
| 19/32″ | 15.0819/32 | 15 mm = 0.591″ | −0.08−0.003 | Interchangeable | — |
| 5/8″ | 15.885/8 | 16 mm = 0.630″ | 0.130.005 | Other size is slightly larger: fits loosely, light use only | 7/16″ hex cap screw |
| 11/16″ | 17.4611/16 | 17 mm = 0.669″ | −0.46−0.018 | No substitute | 7/16″ hex nut; 3/8″ heavy hex nut |
| 3/4″ | 19.053/4 | 19 mm = 0.748″ | −0.05−0.002 | Interchangeable | 1/2″ hex cap screw & nut; 7/16″ heavy hex nut |
| 13/16″ | 20.6413/16 | 21 mm = 0.827″ | 0.360.014 | No substitute | 9/16″ hex cap screw |
| 7/8″ | 22.237/8 | 22 mm = 0.866″ | −0.23−0.009 | Other size is slightly smaller: will not fit; this size is loose on it | 9/16″ hex nut; 1/2″ heavy hex bolt & nut |
| 15/16″ | 23.8115/16 | 24 mm = 0.945″ | 0.190.007 | Other size is slightly larger: fits loosely, light use only | 5/8″ hex cap screw & nut; 9/16″ heavy hex bolt & nut |
| 1″ | 25.41 | 25 mm = 0.984″ | −0.40−0.016 | No substitute | — |
| 1-1/16″ | 26.991 1/16 | 27 mm = 1.063″ | 0.010.000 | Interchangeable | 5/8″ heavy hex bolt & nut |
| 1-1/8″ | 28.581 1/8 | 29 mm = 1.142″ | 0.430.017 | No substitute | 3/4″ hex cap screw & nut |
| 1-3/16″ | 30.161 3/16 | 30 mm = 1.181″ | −0.16−0.006 | Other size is slightly smaller: will not fit; this size is loose on it | — |
| 1-1/4″ | 31.751 1/4 | 32 mm = 1.260″ | 0.250.010 | Other size is slightly larger: fits loosely, light use only | 3/4″ heavy hex bolt & nut |
| 1-5/16″ | 33.341 5/16 | 33 mm = 1.299″ | −0.34−0.013 | No substitute | 7/8″ hex cap screw & nut |
| 1-3/8″ | 34.931 3/8 | 35 mm = 1.378″ | 0.080.003 | Interchangeable | — |
| 1-7/16″ | 36.511 7/16 | 36 mm = 1.417″ | −0.51−0.020 | No substitute | 7/8″ heavy hex bolt & nut |
| 1-1/2″ | 38.11 1/2 | 38 mm = 1.496″ | −0.10−0.004 | Interchangeable | 1″ hex cap screw & nut |
| 1-9/16″ | 39.691 9/16 | 41 mm = 1.614″ | 1.310.052 | No substitute | — |
| 1-5/8″ | 41.281 5/8 | 41 mm = 1.614″ | −0.27−0.011 | No substitute | 1″ heavy hex bolt & nut |
| 1-11/16″ | 42.861 11/16 | 41 mm = 1.614″ | −1.86−0.073 | No substitute | 1-1/8″ hex cap screw & nut |
| 1-3/4″ | 44.451 3/4 | 46 mm = 1.811″ | 1.550.061 | No substitute | — |
| 1-13/16″ | 46.041 13/16 | 46 mm = 1.811″ | −0.04−0.002 | Interchangeable | 1-1/8″ heavy hex bolt & nut |
| 1-7/8″ | 47.631 7/8 | 46 mm = 1.811″ | −1.62−0.064 | No substitute | 1-1/4″ hex cap screw & nut |
| 2″ | 50.82 | 50 mm = 1.969″ | −0.80−0.031 | No substitute | 1-1/4″ heavy hex bolt & nut |
No exact match. The nearest sizes:
How wrench sizes are measured
A wrench or socket size is the distance across the flats of the hex it fits: the jaw opening of an open-end wrench, the inside of a socket. Metric tools are marked in millimetres; SAE (inch) tools in fractions of an inch. The size has nothing to do with the bolt's thread diameter: an M8 bolt takes a 13 mm wrench, a 5/16″ bolt a 1/2″ wrench.
Do not confuse the socket size with the drive size, the square hole for the ratchet: 1/4″, 3/8″, 1/2″ and 3/4″ drive. A "1/2-inch socket" usually means a socket for 1/2″ hex heads, but sometimes a 1/2″-drive socket; check which one is meant.
To identify an unknown head, measure across two flats with a caliper. A reading that matches a whole millimetre (12.9–13.0 mm) is metric; 12.6–12.7 mm is 1/2″.
About Wrench & Socket Sizes
Wrench openings are made slightly larger than nominal (ISO 691 and ASME B107 give the tolerances), and bolt heads slightly smaller, so a tool that is 0.1 mm too big still grips well. Beyond about 0.2 mm the wrench touches only the corners of the head; at high torque it rounds them off. The verdict column uses these limits: within 0.10 mm the sizes interchange, 0.10–0.25 mm works loosely for light jobs (the larger tool on the smaller head only), above that use the right tool.
The bolt column lists the standard heads that take each size. Metric: ISO 4014/4017 hex bolts and ISO 4032 nuts, and the older DIN 931/933/934 sizes where they differ (M10, M12, M14, M22). SAE: hex cap screws (ASME B18.2.1), finished hex nuts and heavy hex nuts and bolts (ASME B18.2.2, structural A325/A490 bolts use heavy hex heads), and hex machine screw nuts.
Some sizes in the chart serve no standard bolt (9, 11, 12, 14, 15 mm and 19/32″) but are common in tool sets for brake lines, fittings, Japanese small-head bolts (12 mm on M8, 14 mm on M10) and equipment-specific hardware.
Six-point or twelve-point
Six-point sockets and box wrenches grip the flats and are the right choice for tight, rusted or high-torque fasteners. Twelve-point tools engage at twice as many angles, which helps in cramped spaces, but they load the corners and round off soft or worn heads sooner. Neither changes the size.
Questions
Is 13 mm the same as 1/2 inch?
No. 1/2″ is 12.70 mm, so a 13 mm wrench is 0.30 mm larger. It slips onto a 1/2″ head but grips loosely; a 1/2″ wrench will not fit a 13 mm head.
What metric size is equal to 3/4 inch?
19 mm. 3/4″ is 19.05 mm, only 0.05 mm larger, so the two are interchangeable.
Can I use a 3/8″ wrench on a 10 mm bolt?
No. 3/8″ is 9.53 mm, 0.47 mm smaller than 10 mm, and will not go on. 10 mm has no close SAE equivalent.
What size socket for a 1/2″ bolt?
3/4″ for a 1/2″ hex cap screw or regular hex nut; 7/8″ for a 1/2″ heavy hex bolt or nut (structural bolts).
What size wrench for an M10 bolt?
16 mm for ISO 4017/4032 heads, 17 mm for DIN 933/934 heads, and 14 mm for Japanese small-head bolts. M8 takes 13 mm, M12 18 or 19 mm.
Which metric and SAE sizes are interchangeable?
Within 0.1 mm: 4 mm = 5/32″, 5.5 mm = 7/32″, 8 mm = 5/16″, 15 mm = 19/32″, 19 mm = 3/4″, 27 mm = 1-1/16″, 35 mm = 1-3/8″, 38 mm = 1-1/2″ and 46 mm = 1-13/16″. All other pairs differ by more and should not be swapped on tight fasteners.
Sources
- ISO 272:1982, Fasteners, hexagon products, widths across flats
- ISO 4014 / ISO 4032: Hexagon head bolts and regular nuts (metric head widths)
- ASME B18.2.1: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch)
- ASME B18.2.2: Nuts for general applications: machine screw nuts, hex, square, hex flange and coupling nuts (inch)
- Portland Bolt: Wrench openings and socket sizing (FAQ)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.