5/16″ Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The 5/16″ unified thread has a major diameter of 0.3125 in (7.94 mm). Coarse thread (UNC): 18 TPI (1.411 mm), tap drill F. Fine thread (UNF): 24 TPI (1.058 mm), tap drill I. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 7.94 mm0.3125 in0.3125 in7.94 mm
- UNC threads per inch
- 1.411 mm18 TPI18 TPI1.411 mm
- UNC tap drill
- F
- UNF threads per inch
- 1.058 mm24 TPI24 TPI1.058 mm
Drawing
5/16″ specifications
| dMajor diameter | 0.3125 in7.94 mm |
|---|---|
| UNC threads per inch | 18 TPI1.411 mm |
| UNC tap drill | F |
| UNC tap drill (decimal) | 0.2570 in6.53 mm |
| UNF threads per inch | 24 TPI1.058 mm |
| UNF tap drill | I |
| UNF tap drill (decimal) | 0.2720 in6.91 mm |
| UNEF threads per inch | 32 TPI0.794 mm |
| Clearance drill, close fit | P |
| Clearance drill, close (decimal) | 0.3230 in8.20 mm |
| Clearance drill, free fit | Q |
| Clearance drill, free (decimal) | 0.3320 in8.43 mm |
| d₂Pitch diameter (basic) | 0.2764 in7.021 mm |
| D₁Minor diameter, nut (basic) | 0.2524 in6.411 mm |
5/16-18 UNC takes a letter F drill (0.257″). It is close to M8 × 1.25 but does not interchange.
Also known as
5/16-185/16"-185/16-245/16"-24
Tap and clearance drills for 5/16″
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.