30216 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 302 series (light)
The 30216 is a tapered roller bearing (302 series, light): 80 mm (3.1496 in) bore, 140 mm (5.5118 in) outside diameter and 28.25 mm (1.1122 in) total width. The cone is 26 mm (1.0236 in) wide and the cup 22 mm (0.8661 in).
- dBore diameter
- 80 mm3.1496 in3.1496 in80 mm
- DOutside diameter
- 140 mm5.5118 in5.5118 in140 mm
- TTotal width
- 28.25 mm1.1122 in1.1122 in28.25 mm
Drawing
30216 specifications
| dBore diameter | 80 mm3.1496 in |
|---|---|
| DOutside diameter | 140 mm5.5118 in |
| TTotal width | 28.25 mm1.1122 in |
| BCone width | 26 mm1.0236 in |
| CCup width | 22 mm0.8661 in |
Also known as
30216J2/QHR30216J4T-3021630216-A30216-XL30216JR30216U
Other tapered roller bearings with a 80 mm bore
Same 80 mm bore in other bearing types
6016Ball Bearings6216Ball Bearings6316Ball Bearings7016Angular Contact Bearings7216Angular Contact Bearings7316Angular Contact BearingsNU216Cylindrical Roller BearingsNU316Cylindrical Roller BearingsNU2216Cylindrical Roller Bearings22316Spherical Roller Bearings21316Spherical Roller Bearings22216Spherical Roller Bearings1216Self-Aligning Ball Bearings1316Self-Aligning Ball Bearings2216Self-Aligning Ball Bearings51116Thrust Ball Bearings51216Thrust Ball Bearings51316Thrust Ball BearingsNA4916Needle Roller BearingsUC216Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.